C A S T I N G | Vacuum Pressure Casting and Accessories INDURET COMPACT and INDURET EASY Vacuum Pressure Casting Description The INDURET COMPACT is suitable for casting precious and non-precious alloys under vacuum. All castings produced are precise and have an homogeneous structure. As the castings are subjected to high pressure, they have no porosity or inclusions. The INDURET COMPACT requires only a small space due to its compact design. Casting temperature is adjusted by the temperature control. Operation is semi-automatic and pre-melting of alloys is possible, but it is often not necessary due to the fact that the INDURET COMPACT heats up very quickly. Description The RETOCAST I is a modern casting centrifuge that is suitable for casting all types of non-precious, precious metal and partial frameworks. The adjustable heating generator optimally adapts to various alloys and allows for quick and troublefree casting. The induction coil drops down automatically at the exact moment of casting. Along with the elecronic safety lock, maximum safety is guaranteed. Easy handling, the intuitive control panel and the large sight glass offer a high degree of user comfort. Owing to the special design of the centrifugal arm the casting centrifuge can be used for all common casting ring system. Features vacuum pressure casting optional temperature control with up to four storage spaces sight glass for optical control graphite and ceramic crucibles argon flushing to reduce oxide layers pressure build-up with compressed air or argon flushing Features induction heating, variable performance sight glass optical temperature control graphite or ceramic crucibles can be used droppable coil electronic lock lid and timer as well as emergency stop button three starting speeds Technical Data Line voltage: 230 V/50-60 Hz Current consumption: 3.600 W Height/width/depth: 390/310+40/650 mm Weight: 38 kg Air-/argon pressure: 5-6 bar Water pressure: min. 3-4 bar (5 l/min.) Casting ring size: 1-9 and model casting Capacity: noble metal 110 g/ non-precious metal 55 g Temperature measurement in the molten alloy: min. quantity 15 g Temperature: max. 1.600 °C Housing: stainless steel Pressure Tank and Water Cooling Unit RETOCAST I Centrifugal Casting Technical Data Line voltage: Current consumption: Height/width/depth: Weight: Speed: Casting ring size: Max. quantity of metal: Min. quantity of metal: Housing: INDURET COMPACT Order-No.: 33800 INDURET EASY without temperature control Order-No.: 33802 Accessories Information about INDURET on page 19, under accessories for vacuum pressure casting machines. 230 V/50-60 Hz 3.200 W 530(930)/740/510 mm 60 kg 500 rpm 1-9 and model casting noble metal 110 g/ non-precious metal 55 g non-precious metal 15 g stainless steel Description The pressure tank (left picture) is designed to compensate variations in compressed air supply. Optimum pressure is granted to achieve continuously precise castings for the INDURET series as well as for other vacuum pressure casting devices. Features 5 l tank capacity and variable pressure housing made of stainless steel suitable for argon and compressed air Technical Data Outlet pressure: Height/width/depth: Weight: Housing: Description The water cooling unit (right picture) is used whenever independent cooling from the water supply line is necessary. The pump takes water from the 40 l tank and cools the casting machine by re-circulation. So, the chance of overheating is eliminated and water consumption is considerably reduced. Universal application for other types of cooling circuits. Features brushless pump for continuous operation digital temperatue display, dirt filter optional automatic power on/off housing and tank made of stainless steel Order-No.: 18000 Accessories Ceramic crucibles for non-precious alloys Ceramic crucibles, extra-deep Graphite insert for precious alloys Order-No.: 28001 Order-No.: 28001.1 Order-No.: 28002 Technical Data Line voltage: Current consumption: Height/width/depth: Volumen: Weight: Max. pump capacity: Housing: 230 V/50-60 Hz 150 W 350/450/580 mm 40 l 12 kg 10 l/min. stainless steel Order-No.: 23807 Made in Germany | Content subject to change | Accessories charged extra

C A S T I N G | Flame Casting Centrifuge and Accessories Accessories for Vacuum Pressure Casting RETOCAST T Flame Casting Centrifuge Accessories for Flame Casting Centrifuges Description The RETOCAST T is a space-saving benchtop unit for precision casting that is suitable for both precious and non-precious alloys and model casting. The proven technology of a centrifugal arm, in combination with different starting speeds and timer control ensure that alloys are cast even into the thinnest cavities within the casting ring, excluding metal waste. The alloys are melted with a flame torch (see chapter...