Renishaw CMM fixtures
36Pages

{{requestButtons}}

Catalog excerpts

Renishaw CMM fixtures - 1

RENISHAWJ apply innovation™ Your single source for metrology fixturing

Open the catalog to page 1
Renishaw CMM fixtures - 2

This page is intentionally left blank.

Open the catalog to page 2
Renishaw CMM fixtures - 3

RENISHAWJ apply innovation™ Section 2 CMM base plates Section 3 CMM fixturing kits Sections 7-15 CMM components Section 16 Custom fixtures CMM Modular Fixtures I www.renishaw.com

Open the catalog to page 3
Renishaw CMM fixtures - 4

Modular fixturing for your CMM Renishaw CMM fixtures can improve the throughput, reproducibility and accuracy of your inspection process by providing quick and repeatable fixturing set-ups for your components. Renishaw CMM fixtures are modular and can be expanded with your requirements to provide a complete fixturing solution for any part regardless of its Whether you are inspecting parts for aerospace, automotive, electronics, industrial or medical applications, Renishaw CMM fixtures can provide a full solution to your CMM fixturing requirements. The range includes fixture plates with M4,...

Open the catalog to page 4
Renishaw CMM fixtures - 5

apply innovation™ CMM base plates2.1 CMM base plates Renishaw CMM fixtures are available with a wide selection of fixture base plate sizes designed to allow fixturing of all workpieces, from very small delicate parts, up to large, heavy industrial components. Renishaw CMM fixture base plates are precision ground within tight tolerances that are key to the quality of the modular Renishaw fixtures system. Base plates are available in standard and custom sizes with a choice of threaded holes: M4, M6 or M8. Cast aluminium base plates are coated with Nituff® hard coat anodise to resist wear and...

Open the catalog to page 5
Renishaw CMM fixtures - 6

Choosing your fixturing kit Renishaw CMM fixtures are sold in preconfigured kits to make it easy to get started. A kit consists of one base plate and a comprehensive set of components. The type of parts you are going to fixture will determine which kit you choose. Renishaw offers two different kit choices: • If you are fixturing steel or cast iron parts, the magnetic and clamping kit is recommended. Kits are available in a range of thread sizes: M4, M6 and M8. Additional components can be purchased to expand your kit. How to choose your kit 1 Choose a thread size: M4, M6 or M8 2 Choose the...

Open the catalog to page 6
Renishaw CMM fixtures - 7

apply innovation™ M4 kits: Clamping4.1 The M4 CMM clamping kits can be used to hold brass, titanium, aluminium, plastic and other nonferrous parts. A kit includes a base plate with M4 threaded holes 10 mm on centre (choose from plate sizes listed below) and a set of components (A) along with plate clamps for mounting to the CMM. Kit part no. Base plate size Set R-CT-40-25-4 40 mm tension clamp with 25 mm post R-CW-25-25-4 25 mm wire clamp with 25 mm post R-CW-50-50-4 50 mm wire clamp with 50 mm post R-AS-30-4 30 mm long adjustable slide R-AS-45-4 45 mm long adjustable...

Open the catalog to page 7
Renishaw CMM fixtures - 8

M6 kits: Clamping The M6 CMM clamping kits can be used to hold brass, titanium, aluminium, plastic and other nonferrous parts. A kit includes a base plate with M6 threaded holes 12.5 mm on centre (choose from plate sizes listed below) and one set of components (A, B, or C) along with plate clamps for mounting to the CMM. R-KC-C2B-6 kit Kit part no._Base plate size_Set Kit part no._Base plate size_Set Kit part no._Base plate size_Set |Qty Part no._Description |Qty Part no._Description |Qty Part no._Description 13 mm dia. x 20 mm standoff 13 mm dia. x 25 mm standoff 13 mm dia. x 50...

Open the catalog to page 8
Renishaw CMM fixtures - 9

apply innovation™ M6 kits: Magnetic and clamping 5.2 The M6 CMM magnetic and clamping kits can be used to hold steel, aluminium, plastic and other nonferrous parts. A kit includes a base plate with M6 threaded holes 12.5 mm on centre (choose from plate sizes listed below) and one set of components (A, B, or C) along with plate clamps for mounting to the CMM. Kit part no._Base plate size_Set Kit part no._Base plate size_Set Kit part no._Base plate size_Set |Qty Part no._Description |Qty Part no._Description |Qty Part no._Description 25 mm dia. x 25 mm standoff 25 mm dia. x 50 mm...

Open the catalog to page 9
Renishaw CMM fixtures - 10

M8 kits: Clamping The M8 CMM clamping kits can be used to hold aluminium, plastic and other nonferrous parts. A kit includes a base plate with M8 threaded holes 15 mm on centre (choose from plate sizes listed below) and one set of components (A, B, or C) along with plate clamps for mounting to CMM. IWV Kit part no._Base plate size_Set Kit part no._Base plate size_Set Kit part no._Base plate size_Set Component set B (part no. R-FSC-CB-8) Component set C (part no. R-FSC-CC-8) 13 mm dia. x 20 mm standoff 13 mm dia. x 25 mm standoff 13 mm dia. x 50 mm standoff 19 mm dia. x 20 mm standoff 19 mm...

Open the catalog to page 10
Renishaw CMM fixtures - 11

apply innovation™ M8 CMM magnetic and clamping kits can be used to hold steel, aluminium, plastic and other non-ferrous parts. A kit includes a base plate with M8 threaded holes 15 mm on centre (choose from plate sizes listed below) and one set of components (A, B, or C) along with plate clamps for mounting to the CMM. Component set A (part no. R-FSC-MCA-8) Component set B (part no. R-FSC-MCB-8) 13 mm dia. x 25 mm magnet 19 mm dia. x 25 mm magnet 25 mm dia. x 25 mm magnet 13 mm dia. x 20 mm standoff 13 mm dia. x 25 mm standoff 13 mm dia. x 50 mm standoff 19 mm dia. x 20 mm standoff 19 mm...

Open the catalog to page 11
Renishaw CMM fixtures - 12

Section 8 Section 9 Section 10 Section 11 Section 12 Section 13 Section 14 Section 15 CMM Modular Fixtures | www.renishaw.com Adjustables Clamps Magnets Miscellaneous Standoff Suction cups Towers Trays

Open the catalog to page 12
Renishaw CMM fixtures - 13

apply innovation™ Adjustable jack stand To allow variable heights of up to 22 mm and then lock into position. Part no. THD DIA HT ADJ Adjustable pivot joint For positioning a component at any angle. Lock the rotating base into position and then set the angle of the pivot. CMM Modular Fixtures I www.renishaw.com

Open the catalog to page 13
Renishaw CMM fixtures - 14

To place components in between holes on the plate. Included: socket head cap and thumb screws. Adjustable V-post For holding cylindrical or tubular parts without marring the part's surface. Can be rotated and locked to any orientation. Included: shoulder bolt. Adjustable height stand To allow variable heights without marring the part. Adjustable angle plate Ideal for holding components on an angle. The angle plate is adjustable to 180°.

Open the catalog to page 14

All Renishaw catalogs and technical brochures