ZipChip® CE-MS Interface Specification Sheet
ZipChip® CE-MS Interface Specification Sheet
The ZipChip® System is designed for capillary electrophoresis-mass spectrometry (CE-MS), offering a compact and convenient interface that integrates fluidics and electronics. It is compatible with various mass spectrometers from Thermo Fisher Scientific and Bruker.
ZipChip® Interface Specifications
- Software: Standalone ZipChip acquisition software that integrates with MS software.
- Dimensions: 7" x 11" x 6.5" (18 cm x 28 cm x 17 cm).
- Weight: 16 lb (7.3 kg).
- Power Requirements: 24 VDC, 65 W.
- Laser Type: Class 1 Laser Product with a 520 nm, 4.5 mW Class 3R laser diode.
Compatible Mass Spectrometers
- ZCI-Classic: Compatible with various Thermo Fisher Scientific models including Exactive and Q Exactive series.
- ZC-Ti: Compatible with Orbitrap Astral, Exploris, Tribrid, and TSQ series.
- ZC-Bi: Compatible with Bruker models such as Compact, Impact, maXis II, and timsTOF series.
Sample Handling Specifications
- Sample Format: Vials or standard well plates (47 mm max height).
- Sample Capacity: Two trays holding 48 vial racks or 96-well plates.
- Sample Tray Cooling: Built-in Peltier cooling with a minimum of 4°C ± 2°C and a maximum of 3°C below ambient temperature.
- Dimensions: 11.75" x 22" x 14.25" (30 cm x 57.5 cm x 36 cm).
- Weight: 46 lb (21 kg).
- Power Requirements: 100–240 VAC ± 10%; 50–60 Hz; 200 VA.
Additional Features
The system supports unattended sample runs from vials or 96-well plates, with the ability to choreograph sample runs using ZipChip software.
Catalog excerpts
Data Specification Sheet ZipChip® SystemProduct SpecificationsZipChip® Interface Capillary electrophoresis-mass spectrometry (CE-MS) has never been more convenient. The compact design of the ZipChip® Interface seamlessly integrates all fluidics and electronics—just clip it on your mass spec and off you go! repligen.com © 2025 Repligen Corporation. All rights reserved. The trademarks mentioned herein are the property of Repligen Corporation and/or its affiliate(s) or their respective owners. | DOC0425 eRev. 1.0
Open the catalog to page 1
ZipChip® System Data Specification Sheet Achieve unattended sample runs from samples vials or 96-well plates. The platform allows you to choreograph sample runs using ZipChip software. Sample Format Vials or standard well plates (47 mm max height) Sample Capacity Two sample trays that hold 48 vial racks or 96-well plates • Built-in Peltier cooling Sample Tray Cooling • Maximum: 3°C below ambient temperature (Measured as air temperature in sample compartment for maximum air temperature 25°C and maximum humidity 80%) Repligen Corporation 685 Route 202/206 Bridgewater, NJ, USA 08807 repligen.com...
Open the catalog to page 2All Repligen catalogs and technical brochures
- Analysis software
- Laboratory testing system
- Windows software
- Spectrophotometer
- Test software
- Data analysis software
- Benchtop spectrophotometer
- Security software
- UV-visible spectrophotometer
- Interpretation software
- Human analyser
- Visible spectrophotometer
- Continuous monitoring system
- Molecular biology software
- Compact spectrophotometer
- Ultraviolet spectrophotometer
- Research spectrophotometer
- Laboratory monitoring system
- Xenon spectrophotometer
- Optical spectrophotometer