AS 200 basic
56Pages

{{requestButtons}}

Catalog excerpts

AS 200 basic - 1

Manual Vibratory Sieve Shaker AS 200 basic Translation © Retsch GmbH, 42781 Haan, Retsch-Allee 1-5, Germany | 30.01.2018 Version 0006

Open the catalog to page 1
AS 200 basic - 2

Copyright © Copyright by Retsch GmbH Retsch-Allee 1-5 42781 Haan Germany

Open the catalog to page 2
AS 200 basic - 6

Notes on the Manual Dear user, please read the following manual referring to this device carefully before starting any installation, commissioning and operation. This manual is a technical guide on how to operate the device safely and it contains all the information required for the areas specified in the table of contents. This technical documentation is a reference and instruction manual. The individual chapters are complete in themselves. Familiarity (of the respective target groups defined per area) with the relevant chapters is a precondition for the safe and appropriate use of the...

Open the catalog to page 6
AS 200 basic - 7

1.3 Explanations of the Safety Instructions In this document the following signs and symbols are being used: In this document the following safety instructions warn of possible dangers and damages: Type of danger / personal injury Source of danger - Possible consequences if the dangers are not observed. • Instructions and information on how the dangers are to be avoided. Life-threatening personal injuries may result from disrespecting the safety instruction for danger. There exists a very high risk of hazard of life or permanent injury to personnel. Additionally, in continuous text or...

Open the catalog to page 7
AS 200 basic - 8

Type of property damage Source of property damage  Possible consequences if the notices are not observed. • Instructions and information on how the property damages are to be avoided. Property damages may result from disrespecting the notice. However, there exists no risk of an injury to personnel. Additionally, in continuous text or action instructions the signal word NOTICE is used. 1.4 General Safety Instructions CAUTION Read the manual Non-observance of the manual  The non-observance of this manual can result in personal injuries. • Read the manual before using the device. Target...

Open the catalog to page 8
AS 200 basic - 9

Changes to the device Improper modifications  Changes to the device can lead to personal injuries. • Do not make any modification to the device. • Use spare parts and accessories that have been approved by Retsch GmbH exclusively. Changes to the device Improper modifications  The conformity declared by Retsch GmbH with the European Directives will lose its validity.  Any warranty claims will be terminated. • Do not make any modification to the device. • Use spare parts and accessories that have been approved by Retsch GmbH exclusively. 1.5 Repairs This manual does not contain any repair...

Open the catalog to page 9
AS 200 basic - 10

Confirmation Form for the Managing Operator Confirmation Form for the Managing Operator This manual contains essential instructions for operating and maintaining the device which must be strictly observed. It is essential that they be read by the user and by the qualified staff responsible for the device before the device is commissioned. This manual must be available and accessible at the place of use at all times. The user of the device herewith confirms to the managing operator (owner) that he has received sufficient instructions about the operation and maintenance of the system. The...

Open the catalog to page 10
AS 200 basic - 11

Technical Data 3 Technical Data 3.1 Degree of Protection - IP54 (IP20 in the area of the sieve carrier passage) 3.2 Emissions A CAUTION Possibility of acoustic signals not being heard Loud sieving noises - Possible acoustic alarms and voice communication might not be heard. • Consider the volume of the sieving noise in relation to other acoustic signals in the work environment. Additional visual signals may be used. A CAUTION Hearing damage A high sound level may be generated depending on the type of material, the number of sieves, the sieving aid used, the amplitude set and the duration of...

Open the catalog to page 11
AS 200 basic - 12

Technical Data 3.3 Electromagnetic Compatibility (EMC) - EMC class according to DIN EN 55011: B Strong electromagnetic interference fields, such as high-power radio transmitters, can have an adverse influence on the amplitude control of the AS 200 basic. Once the source of the interference is eliminated, the AS 200 basic will return to normal operation by itself. - Height without sieve clamping unit: 212 mm - Height with sieve clamping unit: 842 mm - Width with "comfort" clamping unit: 448 mm - Depth: 384 mm - Weight without sieve stack, without clamping unit: ~ 35 kg 3.6 Required Floor...

Open the catalog to page 12
AS 200 basic - 13

Technical Data Mesh size The Vibratory Sieve Shaker AS 200 basic is designed for the measurement range of 20 pm to 25 mm. - Maximum sample quantity: - Maximum sieve stack weight: - Maximum payload: - Maximum sieve stack height: - Maximum number of fractions: 3 kg 4 kg 7 kg (sample material plus test sieves) 510 mm 9 (height of test sieves and collecting pan: 50 mm (2")) / 18 (height of test sieves and collecting pan: 25 mm (1")) - Suitable sieve diameters: 100 mm / 150 mm / 200 mm / 203 mm (8")

Open the catalog to page 13
AS 200 basic - 14

Packaging, Transport and Installation Packaging, Transport and Installation 4.1 Packaging The packaging has been adapted to the mode of transport. It complies with the generally applicable packaging guidelines. Storage of the packaging  In the event of a complaint or return, the warranty claim may be endangered if the packaging is inadequate or the device has not been secured correctly. • Keep the packaging for the duration of the warranty period. Transport  Mechanical or electronic components may be damaged. • The device may not be knocked, shaken or thrown during transport. Complaints...

Open the catalog to page 14
AS 200 basic - 15

Packaging, Transport and Installation 4.4 Conditions for the Installation Site - Installation height: max. 2 000 m above sea level - Ambient temperature: 5 °C - 40 °C Ambient temperature Temperatures outside the permitted range - Electronic and mechanical components may be damaged. - The performance data alter to an unknown extent. • Do not exceed or fall below the permitted temperature range (5 °C to 40 °C ambient temperature) of the device. - Maximum relative humidity < 80 % (at ambient temperatures < 31 °C) For ambient temperatures Ut between 31 °C and 40 °C, the maximum relative...

Open the catalog to page 15

All Retsch catalogs and technical brochures

  1. MM 500 nano

    2 Pages

  2. MM 500 vario

    2 Pages

  3. RD 100

    2 Pages

  4. TM 500

    2 Pages

  5. Emax

    20 Pages

  6. ZM 200

    32 Pages