1. Catalogs
  2. reverberi
  3. LABO VACUUM 23 M9010/80

LABO VACUUM 23 M9010/80

LABO VACUUM 23 M9010/80

LABO VACUUM 23 M9010/80

Product catalog summary
Overview: The document describes a vertical steam sterilizer equipped with wheels, designed for efficient sterilization processes. It includes a new data processing transmission system with an incorporated SD card.
Manufacturer Information: The sterilizer is produced by Reverberi Arnaldo S.r.l., located in Barco, Reggio Emilia, Italy. The company is certified under UNI EN ISO 9001 & EN 13485 standards.
Standard Features:
  • Automatic water filling with a button and suction pump for distilled water.
  • Vacuum pump capable of reaching up to three peaks.
  • Safety valves and thermostat to prevent overpressure.
  • Electronic check-control for each function.
  • Removable stainless steel basket and tank for used water.
  • Water level float and minimum water level signal in the chamber.
  • PT100 probe for temperature detection and a drain cock.
  • Printer predisposition and possibility of PC connection.
  • Extraction of steam/air residual with a vacuum pump.
Technical Features:
  • Power supply: 230 V – 50 Hz.
  • Power: 2500 Watt.
  • Boiler dimensions: Ø237 x 530 mm.
  • Autoclave dimensions: 48x38x95 cm (WxDxP).
  • Working pressure: 3180 – 2180 Mbar.
  • Chamber capacity: 23 liters.
  • Water pressure exceeding 2 bar.
  • Incorporated SD Card for data processing.
Standard Equipment:
  • Stainless steel basket.
  • Vials holder.
  • Cleaning sponge.
See more

Catalog excerpts

LABO VACUUM 23 M9010/80-1

AZIENDA CON SISTEMA QUALITA’ CERTIFICATO UNI EN ISO 9001 & EN 13485 Reverberi Arnaldo S.r.l. Via Don Luigi Sturzo n°6 42021 BARCO (Reggio Emilia) ITALY Tel. 0039 0522/875159 Fax. 0039 0522/875579 [email protected] www.reverberisrl.com Vertical steam sterilizer equipped with wheels NEW DATA PROCESSING TRANSMISSION SYSTEM

 Open the catalog to page 1
LABO VACUUM 23 M9010/80-2

Power supply 230 V - 50 Hz Power 2500 Watt Boiler dimensions 0237 x 530 Dimensions of the autoclave 48x38x95 cm (WxDxP) Working pressure Mbar 3180 - 2180 Chamber capacity 23 Lt Water pressure exceeding 2 bar SD Card Incorporated Stainless steel basket Vials holder Cleaning sponge

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.