Colson Europe TwinTech Solus Specifications Body and Wheel Centers • Pressure-diecast aluminum for light weight, high load capacity, resistance to abuse, and electrical safety. • Standard finish: epoxy coating in White RAL 9003. Axle • Precision hardened and ground steel shaft, manufactured to exacting tolerances; provides extended service life. Bearings • Headwork thrust race with hardened cup and cone ensures minimal wear and swivel resistance. • Precision needle roller bearings fitted as standard for low rolling resistance. Brake • Brake mechanism enabled through diecast teeth around each wheel hub and swivel pin. Tires • Tire profiles to suit hard and soft floor surfaces. • Gray rubber, or gray polyurethane, with extremely hard wearing properties for temperatures up to 176˚F (80˚C). Low rolling resistance and very high load capacity. • Gray, non-marking rubber for softer ride and temperatures up to 149˚F (65˚C). Twin Wheels • Independent rotation allows minimal swivel effort. • Totally enclosed bearings, swivel and brake mechanisms in minimal height housing. Minimal wheel lubrication may be needed in extreme conditions. Ordering Options TwinTech Solus Engineering Mounting Stem Brake Pedal Axle Brake Spring Retaining Plate • Body and wheel hubs can be powder coated in virtually any color to match existing equipment. (Consult factory for pricing and set-up charges.) • Tires available in polyurethane, rubber, and nylon in a selection of color, shape, hardness, or electrical characteristics. • Optional hard tread tire in black nylon for high maneuverability on suitable floors. • Mounting stem can be customized to user’s requirements. • Special “Gold Seal” version provides 72hour salt spray protection through special plating quality and additional seals for regular autoclaving or steam cleaning. (Consult factory for pricing and set-up charges.) • Available with the following brake options: 1. Wheel lock 2. Directional lock 3. Total lock • Caster construction for non-magnetic characteristics. • Anti-static rubber, nylon, or polyurethane tires. • Delrin® bearing wheels. Call Toll-

TwinTech - Solus Swivel Casters Simple, clean lines combined with the ability to swivel freely in all directions make the TwinTech Solus Swivel Caster ideal for high-technology equipment. It features a lower overall height than traditional casters to maximize stacking capacity, or to stabilize legs which need to slide under equipment. The Total Lock models feature a brake mechanism that is fully enclosed between the twin wheels to avoid wear on tires often associated with external brakes. The brake is activated by light pressure on a smooth-contoured pedal, manufactured from tough, reinforced...

Colson Europe TwinTech Combi Specifications Cam Capsule The locking mechanism is totally enclosed within the capsule. It is activated by an 11mm hexagonal drive bar, which can be set for three modes of operation: 1. Wheel and caster swivel; 2. Wheel swivel, but caster positioned in directional lock; 3. Wheel and caster total locked. Ordering Options • Overall height of caster can be extended to match conventional single-wheel casters for greater ground clearance and under-trolley access. • Alternative “D” section drive bar actuating mechanism can be specified. • Body and wheel hubs can be powder...

TwinTech - Combi Total Lock Swivel Casters TwinTech Combi Casters offer all of the design features and benefits of the TwinTech Solus models plus sophisticated braking options. The Total Lock models feature a mechanical brake that allows the wheels to swivel and rotate freely when in the "off" position, and will prevent both swiveling and rotation when in the "on" position. The brake system uses metal teeth that engage simultaneously with complementary teeth on the wheel hub and swivel pin to immobilize the caster. This central locking system does not cause the wear on brake pads and tire surfaces...

ca/san Colson Europe TwinTech - Combi Swivel Casters TwinTech Combi Casters feature a head-bearing design that allows 360-degree swiveling with complete freedom. Since its overall dimensions are identical to others in the range, these Combi models can be used in combination with other types of Combi casters. This model also can be supplied in a non-swiveling, guiding caster version. Type Wheel Dia. Load Capacity Bearing Wheel Type Weight Part Number Standard Finish: Body - White RAL 9003. Options (Consult Factory) • "Gold Seal" washable casters • Longer mounting stems available • Colored...

TwinTech - Combi Plunger Lock Casters TwinTech Combi Plunger Lock Casters are designed to immobilize equipment quickly and easily. They offer the streamlined contours, exceptional maneuverability, and wide range of available materials and finishes standard with the TwinTech range. No adjustments or maintenance are required as the casters will provide a long life of positive operation and reliability. The plunger pad is made of soft, non-marking rubber for maximum friction resistance. Type Wheel Dia. Load Capacity Bearing Wheel Type Weight Part Number Plunger Lock 5” 298 lbs. Roller Gray...