Omicrom VISION VET

Product catalog summary

Overview: The Omicrom Vision VET is a veterinary vital signs monitor designed for small, medium, and large animals. It incorporates advanced features for comprehensive monitoring, including heart rate, respiration, temperature, SpO2, and non-invasive blood pressure (NIBP).

Specifications:

Heart Rate: Up to 800 bpm with specific algorithms for QRS and respiration detection.
Dimensions: 310 x 260 x 210 mm; Weight: 7 kg.
Power Supply: 85-264 V; 47-63 Hz; 2 hours battery autonomy with built-in charger.
Environmental Conditions: Operating temperature 0 ºC to 40 ºC; Relative humidity 5% to 90% non-condensing.

Measurement Capabilities:

ECG: 7 leads, fully isolated, defibrillator protected, with a range of 20 to 800 bpm and accuracy of ±2%.
NIBP: Oscillometric method with a range of 10 to 250 mmHg and overpressure limit of 300 mmHg.
SpO2: Range 0 to 100%, accuracy of ±2% for 70 to 100% saturation.
Temperature: Range 15 to 45 ºC, accuracy of ±0.1 ºC, using oesophageal, rectal, or skin probes.

Display and Interface:

Display: 10.4-inch TFT color display with resolution 640 x 480 pixels.
Recorder: Optional 4-channel recorder.
Alarms: Optical and acoustic alarms with three priority levels.
Trends: Up to 96 hours of data for all parameters.

Additional Features:

Optional Modules: Anaesthetic agents module, gating to PET, SPECT, CT, and US devices.
Safety Standards: Complies with IEC 601 standards, fully isolated, defibrillator protected.

Ordering Information: Various cables and sensors available, including ECG main cable, SpO2 extension cable, NIBP cuffs, and temperature probes.

Contact Information: Distributed by RGB Medical Devices, Madrid, Spain. Phone: +34 913 042 011, Fax: +34 913 273 903, Website: www.rgb-medical.com

Catalog excerpts

Omicrom VISION VET VETERINARY VITAL SIGNS MONITOR NIBP Non Invasive Blood Pressure OPTIONAL: ANAESTHETIC AGENTS module Omicrom Vision VET incorporates latest innovations for small, medium and big size animals monitoring. Heart Rate up to 800 bpm. Specific algorithm for QRS and Respiration detection. Optional module for “gating” to PET, SPECT, CT and US devices.

Open the catalog to page 1

Technical Data ECG Amplifier: Fully isolated, defibrillator protected > 5 kV; recovery time < 5 s; RF noise and monitoring filters. Leads: I, II, III, ( V, aVL, aVF, aVR. ) Freeze and memory: ST Segment. Frozen ECG, 12 seconds for analysis and measurement. Heart rate: Range: 20 to 800 bpm Accuracy: ±2 % CMRR: > 115 dB in monitor mode > 90 dB in diagnostic mode Signal features: Diagnostic mode: 0.05 to 100 Hz Monitor mode: 0.5 to 25 Hz O. R. mode: 0.5 to 25 Hz Rodent mode 2 to 150 Hz Programmable gain: 0.2 to 4 mV Display: TFT colour display. Up to seven (7) traces on screen. Size: 211 x 158 mm...

Open the catalog to page 2

All RGB Medical Devices catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list