D-series
1 / 20Pages

brightening ideas

What happens if the smallest part of your medical device isn't be reliable and consequently compromises the whole product? RIMSA engineers focused on safety to develop innovative, original and efficient surgical lights. Every mechanical and electrical components have been tested for several years before to being installed on OT lamps. Experience, reliability, and research enabled RIMSA to develop OT surgical lights, achieving prestigious and incomparable results: excellent lighting performances, cold light shadowless, personalized design, deep lighting, focal column to avoid re-focussing of...

LIGHT INTENSITY The threshold of intense luminosity tolerated by each individual is subjective and depends upon the predisposition of the eye to luminous display. Generally high luminous intensity provokes dazzle phenomena in the eye, stimulates the musculature of the pupil with consequent sight fatigue, and disturbs the surgeon’s vision during the rapid succession of images from the operating field to the surrounding environment. This is why we advise a luminous intensity between 100,000-130,000 lux for surgical operations, while a luminous intensity of 50,000 lux is suitable for small...

quality lig^t Deplh ol iHuminalion {I EC60601 -2-41) Li+L? DEEP LIGHT The depth of light illuminates the cavity three-dimensionally, also helping to highlight the smallest details. The geometry of tens of connected ellipsoids directs the luminous rays into a cone of light, illuminating in depth. COLD LIGHT The fundamental prerogative of an excellent shadowless lamp is its "cold" light, avoiding dehydration of the tissues during the operation and rendering the surgeon's work comfortable. Special "RMS97 filters" (D400) and the "Dichroic treatment" (Saturno and Tris) eliminate the infrared...

DLE DEVICE On request it is possible to fit the DLE device, consisting of an electronic commutation card and reserve lamp. In case of damage to the main lamp, the electronic card instantaneously commutes the switching of the reserve lamp on and an intermittent green telltale led switches on to signal the damage and request the substitution of the burnt-out lamp. LAMINAR FLOW The two-satellite solution is particularly advised for operating theatres with laminar flow. In this case the reduced dimensions of the cupolas does not interfere with the laminar flow. ELLIPTIC REFLECTOR In aluminium,...

D400 Illumination for operating theatre with reflected optics system ELLITTICA The D400 series is a high technology apparatus designed to guarantee technical-illumination performance, unique of its kind. The reduced dimensions and the lightness of the reflector give the product stability and make it extremely easy to handle. The luminous beam is always in focus, starting from a minimum distance of 60 cm. The diameter of the field illuminated is regulated manually by rotating the handle, which can be sterilised, at the centre of the reflector. The luminous intensity can be adjusted...

ROTATION WITHOUT STOPPING The central and lateral rotations are at 360° without stopping. Transmission of current takes place through sliding contacts produced in RIMSA. VERTICAL The vertical arm has 97° dispersal and a 1455 mm range. Balance takes place with a compression spring and can be adjusted if this becomes necessary over time. It is light and special bronze bearings render it stable in every position. DEPTH The “elliptic” reflector reflects the luminous rays generated by the bulb over the operating field in dotted form to guarantee constant focus and threedimensional light. Thanks...

ALUMINIUM The load-bearing “light-struct” structure of the lamp is in aluminium tubing with a diameter of 45 mm. This detail facilitates installation without the aid of mechanical lifts, making the product suitable for any type of ceiling and easy to manoeuvre, facilitating the dispersion of heat. LUMINOSITY The luminous intensity is adjusted electronically by 20,000 lux at maximum intensity. The surgeon can set the luminous intensity desired in relation to the type of operation.

DLE On request it is possible to fit the DLE device, consisting of an electronic commutation card and reserve lamp. In case of damage to the main lamp, the electronic card instantaneously commutes the switching of the reserve lamp on and an intermittent green telltale led switches on to signal the damage and request the substitution of the burnt-out lamp. ROTATION AT 10° The floor lamp version has been designed to be rotated 10° on the vertical stand without needing to rotate the base. This technical solution makes it particularly indicated for places where for logistic reasons it is...

reflected optics^ystem RIMSA shadowless lamps satisfy the requisites of "quality light'' The D600 series is a high technology apparatus designed to guarantee technical- illumination performance, unique of its kind. Complex mathematical calculations have allowed the creation of the original and revolutionary stratified and in-depth multi- elliptical reflector for intense light without shadows. The reduced dimensions and the lightness of the reflector give the product stability and make it extremely easy to handle. Special RMS97 filters eliminate the infrared rays generated by the halogen...

Special "RMS97" filters eliminate the infrared rays generated by the halogen lamp, avoiding dehydration of the tissues during surgeon's work comfortable. The "elliptic" reflector reflects the luminous rays generated by the bulb over the operating field in dotted form to guarantee constant focus and three-dimensional light. Thanks to this principle the light is always in focus starting from a particularly advised for operating theatres with laminar flow. In this case the reduced dimensions of the cupolas does not interfere with the laminar flow. The luminous intensity is adjusted maximum...

RIMSA, quality light 11

Illumination for operating theatre with reected optics system “SHADOWLESS” double oodlight