Operating table RiEye Mk2S
1 / 28Pages

User manual Operating table RiEye Mk2S - Model R5 100-00105-05 - Model R6 100-00105-06 - Model R7 100-00105-07

Operating table RiEye Mk2S

Operating table RiEye Mk2S Introduction - operating table RiEye Mk2S Thank you for choosing Rini’s Operating table for microsurgery. RiEye Mk2S with modern attractive design is developed functionally and ergonomically in close collaboration with several leading Swedish and international clinics. The table has a wide area of applications in both "stationary mode" procedures or in "mobile roll-in roll-out" procedures. Great care has been put into the design of the table and its accessories to improve the freedom of movement for both the surgeon and assisting personnel in the vicinity of the...

Operating table RiEye Mk2S RiEye Mk2S is based on a base platform and is available in three models that can be equipped with most of the available accessories making it possible to customize the table for different mobile and stationary procedures. Model R5 Width 580mm/23in and leg rest 400mm/16in. Suitable when physical space in the clinic is limited or the requirement is that the table should be possible to fold the table as a chair. Accessories shown: Holder hand control and width extension. Model R6 Width 580mm/23in and leg rest 500mm/20in. This model offers a good compromise between...

Operating table RiEye Mk2S Unpacking To ensure patient safety and the life span of the product it is important to observe the following instructions before use. Please read this manual carefully and understand how to use the product before you start. Before you unpack check the packaging. Report any damage immediately to the transport company and your local Rini representative. Remove the top of the pallet and take out any non-installed accessories that are packed separately Do not use sharp tools when removing the packaging material. This can cause damage. Make sure that the delivery...

Operating table RiEye Mk2S Mounting of cushions The cushions have a quick locking mechanism that allows easy mounting and removal. Make sure when mounting that the material between the cushions is placed as shown in the pictures so it does not get stuck. Before use for maximum safety of persons and product: Read through this manual or make sure you have received the required training to handle this product. Understand where the emergency stop is located and how to use it. Understand how the "Trendelenburg" position is activated.

Operating table RiEye Mk2S Product classification and key data The product is designed for use in hospitals, specialist clinics or similar care environments by professional staff. The product's risk class in accordance with MDR 2017/745 Annex VIII is “Class 1”. Previous generations and similar products are also within risk class “Class 1”. The product's device class according to the US FDA is “Class 1” and exempt from premarket notification 510(k) requirements. The product is traceable via serial number and Rini has a "Postmarket surveillance" system integrated within its quality system...

Operating table RiEye Mk2S Getting started Picture and location of components 15 Headrest (standard model) Hand control Backrest width extension (option) Drape support with air connection (option) Side rails (option) Leg rest (show in picture is model R6) Detachable battery module Front wheels left with directional lock capability Emergency stop Foot control (option) Hand control holder (3 different options are available) Central break on all four wheels (downward position) and control of directional lock on left wheel for transport (upward position) Electrical brake is available as option...

Operating table RiEye Mk2S Areas of use The RiEye Mk2S operating table is designed for microsurgery and can be used either as a stationary unit in the operating room or used as a mobile unit according to the "roll-in roll-out" method. The table ensures a high freedom of movement for surgeons and assistants around the patient's head. Its intended areas of use include: • • • • Eye surgery Ear, nose and throat surgery Esthetic facial surgery Dental surgery If full anesthesia is used the table should be equipped with the optional extended leg rest and anesthesia armrest. The table is only...

Operating table RiEye Mk2S To brake and lock the position of the table the foot pedal is pressed down. The brake is released by lifting the pedal until the middle position has been reached. To set the directional lock, first align the front left wheel straight and then pull the foot pedal fully upwards. To release the directional lock function, move the pedal in the downwards one step until the middle position has been reached. There is an option to have electrical brake and directional control on the RiEye Mk2S and then no brake pedal is fitted. Braking and directional control is...

Operating table RiEye Mk2S function can be selected at a time. The function keys are used in conjunction with Up and Down buttons. Seat - Raises and lowers the height of the table Back - Changes the angle of the backrest Leg - Changes the angle of the leg rest Knee - Raises or lowers the knee support Up - Controls the upward direction after the selection function Down - Controls the downward direction after the selection function Rotate - The table can be rotated while keeping the angle between the back rest, seat, and leg rest by pressing the buttons for Seat and Back rest simultaneously....

Operating table RiEye Mk2S Trendelenburg position In an acute patient situation, the table can be put in Trendelenburg position so that the patients head is lower than the rest of the body. To quickly activate this function there is a dedicated button “Trend”. If this button is pressed the whole table is made flat with an angle of minus 15 degrees with the head in the lowest position. Be careful handling this function so it is not activated by mistake. It can cause personal injury. Foot control (optional) The foot control gives additional control of some key adjustments normally to be used...