1. Catalogs
  2. Rini Medtech
  3. Surgeon chair Carl Mk2 and Carl 4 Foot/Heel

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel
1 /16Pages

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel
1 /16Pages

Catalog excerpts

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-1

User Manual Surgeon chair Carl Mk2 and Carl 4 Foot/Heel - Model R5 – Easy Model R6 – Rilis Model R7 – OneGrip Model R8 – FlexiDoc (Carl Mk2)

 Open the catalog to page 1
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-2

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel

 Open the catalog to page 2
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-3

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Surgeon chair Carl Thank you for choosing the Rini Surgeon chair Carl. Carl Mk2 with extra accessibility for feet and pedals through uniquely designed chassis with three wheels or Carl 4 Foot/Heel with four wheels Ergonomic comfort for the surgeon through an intuitive setup and with either "Easy" armrest (R5), the patented safety armrest "Rilis" (R6), "OneGrip" armrest (R7) or "FlexiDoc" armrest (R8 only available for Carl Mk2) Convenient to move thanks to easy-rolling wheels and a stable parking position by an electric or mechanical brake Easy to clean...

 Open the catalog to page 3
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-4

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel 2.1 Unpacking Before the product is unpacked make sure that the packaging has not been damaged during transport. If so, document these with a picture and report this immediately to the transport company and your local Rini representative. In the packages the chair is normally in the following parts: • • • Complete chair with wheels and seat mounted Backrest and two armrests Battery charger and user manual Be careful when lifting the chair off the pallet. The chair is heavy and may cause injury. Do not use sharp tools when removing the packaging material....

 Open the catalog to page 4
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-5

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel For safety reasons including both person and product it is necessary to have sufficient training in using the product. Before use, please check the following: • • • • That the product has not been damaged in transport. That adjustment of back, seat, height and armrest can be done according to this manual That the brake is working That the battery is fully charged Please contact your local Rini representative if you have any questions or concerns. 2.3 Intended areas of use The surgeon chair Carl is developed for different types of microsurgeries where...

 Open the catalog to page 5
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-6

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Product classification and key data The product is designed for use in hospitals, specialist clinics or similar care environments by professional staff. The product's risk class in accordance with MDR 2017/745 Annex VIII is “Class 1”. Previous generations and similar products are also within risk class “Class 1”. The product's device class according to the US FDA is “Class 1” and exempt from premarket notification 510(k) requirements. The product is traceable via serial number and Rini has a "Post-market surveillance" system integrated within its quality...

 Open the catalog to page 6
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-7

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Basic adjustments of the chair Back height adjustment Shown is Carl Mk2 R6 with safety armrest ”Rilis” Seat angel adjustment Back angel adjustment Electrical brake for rear wheels Chair height adjustment Back height adjustment Shown is Carl 4 Foot R7 with armrest ”OneGrip” Seat angel adjustment Back angel adjustment Chair height adjustment Carl 4 Foot Brake for rear wheels Carl Mk2 (upper picture) and Carl 4 Foot (lower picture) has intuitive controls and buttons to adjust the chair to an effective and ergonomic working indicated in yello

 Open the catalog to page 7
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-8

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel 4.1 Chassis, wheels and brake The chassis design with 3 wheels (Carl Mk2) combines stability with high availability of technical equipment such as pedals on the floor around the chair. The chair can also be equipped with a separate pedal stand as an accessory. Large high-quality ball bearing wheels facilitate movement and the rear wheels are lockable with an electric brake that is controlled by an alternating on / off button. When the brake is used, an audible signal sound. The chassis design with 4 wheels (Carl 4) is extra stable and suits users who...

 Open the catalog to page 8
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-9

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Adjust the backrest to a comfortable position by lifting the lever which then locks in this position when it is dropped. The backrest height adjustment device is placed on the back of the chair. Adjust the height by loosening the knob and lock a suitable position by tightening it again. Backrest height Basic adjustment of width of armrests (Model R5, R6, R7) 4.5 Model R5 - "Easy" armrest Rinis "Easy" armrest have square cup shaped plates that are able to be set in all possible angles. 5. Knob for adjusting the armrest plate in 360° angle 4. Knob for...

 Open the catalog to page 9
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-10

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Setting 1 (Basic setting) Move the position of the armrest by loosening the knob and sliding the armrests. Setting 2 (Basic setting) The width between the armrests can be adjusted by loosening the knob under the seat. Setting 3 (Basic setting) The height of the entire armrest can be adjusted so it is in the center of the work area for subsequent fine tuning. Use the knob to set the appropriate armrest height. Setting 4 Turn knob to adjust the sideway position as well as the friction of the armrest. Setting 5 Turn the knob to release and then set the...

 Open the catalog to page 10
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-11

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Setting 2 (Basic setting) The height of the entire armrest can be adjusted so it is in the center of the work area for subsequent fine tuning. Use the knob to set the appropriate armrest height. Setting 3 (Basic setting) The width between the armrests can be adjusted by loosening the knob under the seat. Setting 4 By pressing the buttons, the armrest can be adjusted for an optimal working position. To release the armrest, you need to use two hands for safety reasons. One hand to move the armrest pad up and down, while the other hand push the button....

 Open the catalog to page 11
Surgeon chair Carl Mk2 and Carl 4 Foot/Heel-12

Surgeon chair Carl Mk2 and Carl 4 Foot/Heel Setting 1 (Basic setting) Move the position of the armrest by loosening the knob and sliding the armrests. Setting 2 (Basic setting) The height of the entire armrest can be adjusted so it is in the center of the work area for subsequent fine tuning. Use the knob to set the appropriate armrest height. Setting 3 (Basic setting) The width between the armrests can be adjusted by loosening the knob under the seat. Setting 4 Turn knob to adjust the sideway position as well as the friction of the armrest. Setting 5 By pulling the lever upwards, the armrest...

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.