User Manual Surgeon Chair Carl - Model - Carl Spring R6 Rilis Model - Carl Swing R6 Rilis Model - Carl Spring R7 OneGrip Model - Carl Swing R7 OneGrip

Surgeon Chair Carl Spring and Carl Swing

Surgeon chair Carl Spring and Carl Swing 1. Surgeon chair Carl Thank you for choosing the Rini Surgeon Chair. The chair offers excellent comfort with its ergonomic design enabling high efficiency in daily patient work for surgeons and medical professionals. The model R6 is supplied with Rini's patented safety armrest "Rilis" that can be adjusted with high precision to the desired position. The model R7 is equipped with "OneGrip" armrests, popular when small adjustments are required. The surgeon chairs are especially designed for microsurgery and developed in cooperation with surgeons in Sweden...

Surgeon chair Carl Spring and Carl Swing b) Put the seat on the gaspiston and then the backrest. c) Finally put the armrest into the armrest bracket and tighten. Note that the adjustment buttons for R6 armrests should point out from the chair. 3. Product classification and key data The product is designed for use in hospitals, specialist clinics or similar care environments by professional staff. The product's risk class in accordance with MDR 2017/745 Annex VIII is “Class 1”. Previous generations and similar products are also within risk class “Class 1”. The product is traceable via serial number...

Surgeon chair Carl Spring and Carl Swing product was manufactured appears on the type plate below. For questions about this product, specify the UDI and SN for identification. 3.1 Intended areas of use The surgeon chairs Carl Spring and Carl Swing are developed for different types of microsurgeries where the surgeon needs a stable seated work position with flexible relief for the arms. Intended uses include: Neurosurgery, Eye Surgery, ENT surgery, Facial Plastic Surgery, Robotic Surgery, Dental Surgery The chair may only be used for the purposes specified in this manual. Any other use may pose...

Surgeon chair Carl Spring and Carl Swing 4. Basic adjustment of the chair 1. Armrests can be placed in two alterative positions, either in front of the seat or towards the back of the seat (shown are R6 armrests). 2. Adjustment of height of backrest 3. Adjustment of seat and backrest angle 4. Height adjustment 5. Foot brake on back wheels (Carl Spring only)

Surgeon chair Carl Spring and Carl Swing 4.1 Model R6 - "Rilis" safety armrest Rinis patented safety armrest Rilis has extensive adjustment possibilities to offer an optimal ergonomic working position. 5. Lock wheel for adjusting the armrest longitudinal and lateral 4. Push buttons (without load) for fine adjustment of height and position 3. Adjustment of the armrest width 2. Adjustment of the armrest height 1. Adjustment of the position, use front or back bracket under seat. Setting 1 Place the armrest in the front or back bracket and lock the position. Setting 2 The height of the entire armrest...

Surgeon chair Carl Spring and Carl Swing 4.2 Model R7 - "OneGrip" armrest The OneGrip is suitable when an up/down adjustment range is needed and it is required to be able to adjust the armrest while sterile draped. 5. Lever for fine adjustment of the armrest angle up/down 4. Knob for adjustment of sideway position/friction 3. Adjustment of the armrest width 2. Adjustment of armrest height 1. Adjustment of the position, use front or back bracket under seat. Setting 1 Place the armrest in the front or back bracket and lock the position. Setting 2 The height of the entire armrest can be adjusted...

Surgeon chair Carl Spring and Carl Swing 4.3 Tips for comfortable position To achieve the best level of comfort please try the following steps. 1. Whilst seated in the chair, adjust the height of the chair to achieve a 90o angle of the legs. The feet shall have the whole sole against the ground during the adjustment. 2. Adjust the seat and backrest to a comfortable position. 3. If necessary, fine-tune the height of the seat. 4. Adjust the armrests to a comfortable surgical position. 5. Move the chair against the operating table to achieve optimal access to the patient and foot pedals. 6. If necessary,...

Surgeon chair Carl Spring and Carl Swing 5. Disinfection, cleaning and repairs No part of the product is normally in contact with the patient and the armrests are normally draped during surgery. Disinfection Part Upholstery and armrests Product Virkon (including most disinfectants without alcohol). Other information 1% concentration. Noedischer Dekonta CCOTRADE RW (Disinfectants containing alcohol cannot be used due to possible dehydration) Cleaning Part Upholstery and armrests Product Water and soap Other information Use damp cloth Repairs The product should only be repaired by Rini or a Rini...

Surgeon chair Carl Spring and Carl Swing 7. Technical specifications Dimensions Back support Seat Total width Height range Swing low 430-570mm /16-22in Swing standard 500-700mm /20-28in Swing high 580-820mm /23-32in Safe Working Load Operational environment Temperature range Relative air damp Atmospheric pressure 8. Disposal and recycling The product is mainly made from environmentally recyclable materials as steel, stainless steel, aluminum and plastics. Rini recommends that the material be sorted and recycled in connection with the destruction of the product. 9. Warranty The warranty is valid...

Surgeon Chair Carl Spring and Carl Swing Rini Ergoteknik AB Fågelsångsvägen 3B SE-186 42 Vallentuna Sweden Phone +46 8 594 77170 Email [email protected] www.rinicompany.com 12