CX Series: CX 800, CX 2000, CXT 3000
6Pages

CX Series Auto Ref-Keratometer Auto Ref-Topographer Making analysis fashionable

The CX Series: Choose the perfect match for your business What’s your benefit? Consistent quality Intuitive operation Long-term experience you can rely on User-friendly application Time savings Added value Shortened refraction process The wide range of choices was impressive. And I found the perfect device. Comfortable and fast examination Topography and Tear Stability Analysis as an exclusive function of the CXT 3000 Ready for connection to our Phoromat 2000 (only with the CX 800 and CX 2000) A smart selection to suit your nee

☆ Auto measurement By aligning the optical head towards the patient's eye, the measurement is automatically taken by the CX 800. ☆ Refraction Accurate starting values for subjective refraction are essential. The highspeed mode allows accurate results to be obtained - even in uncooperative patients. ☆ Keratometry The CX 800 provides you with the central (0 3 mm) keratometer readings within one second. Measurements can be taken from the front surface of the cornea or the back surface of RGP contact lenses. Pupil & cornea diameter Measurements can be taken easily by moving the two cursors on...

☆ Auto alignment & auto measurement Anyone can easily take measurements with auto alignment and auto measurement. The measurement variation is significantly reduced and does not depend on the operator’s skill level. ☆ Enhanced keratometry The CX 2000 provides keratometer values for the central (0 3 mm) and peripheral (0 6 mm) cornea simultaneously within one second. Measurements can be taken from the front surface of the cornea or the back surface of RGP contact lenses. KAI (Kerato-Asymmetry Index) and KRI (Kerato-Regularity Index) display irregularities of the cornea. ☆ Touch screen...

☆ Corneal topography Various topography maps support you in carrying out vision screenings, contact lens fittings and in patient education. ☆ Tear Stability Analysis System (TSAS) The TSAS analyses the tear stability using the light-cone system. The mire ring is projected onto the cornea of the patient's eye for either 6 or 10 seconds, and the image of the mire ring is captured at specific intervals. The system shows in the colour code map the position and time where the tear layer changes. ☆ Touch screen operation The 6.4" colour touch screen is very convenient - it is used as the...

REFRACTIVE POWER MEASUREMENT CORNEAL SHAPE MEASUREMENT (AT 8.0 MM CORNEAL CURVATURE) REFRACTIVE POWER MEASUREMENT CORNEAL CURVATURE MEASUREMENT (K1, K2, AVG) CORNEAL ASTIGMATISM & AXIS (C, A) MAIN UNIT DIMENSIONS & ELECTRICAL REQUIREMENTS 2020/06 - subject to change without notice