OXYGEN CONCENTRATOR ISO 9001:2008 ISOI 3485:2003 CE 0434 MIC Oxygen Concentrator Instruction Guide WARNING-Read instruction guide before operating this equipment. © DANGER — NO SMOKING Spisi 39 1714 Heitenried, FR Switzerland

Spisi 39 1714 Heitenried, FR Switzerland 2

Spisi 39 1714 Heitenried, FR Switzerland

condition of system pressure (lo-p/hi-p) condition of oxygen purity (lo-o2) heating condition (hi-t) total time that this device is operated low pressure / high pressure low oxygen purity high temperature a. Power indicator (green light) b. Normal oxygen (green light) c. Low oxygen (yellow light) d. Alarm (red light) Device is operating regulated Oxygen purity is under normal condition Oxygen purity is below 85%, ASK FOR SERVICE TURN this device OFF and contract your device supplier for service immediately. Nebulization Designed Model View (Figure 4-5) a. Nebulization is one of the optional designed...

SETTING UP YOUR OXYGEN CONCENTRATOR 1. Position your unit near an electrical outlet in the room where you spend most of your time. A DANGER Keep the oxygen concentrator at least 5 feet Cl.6 m )from hot, sparking objects or naked sources of flame. NOTE — Do not connect to an electrical outlet controlled by a wall switch. No other appliances should be plugged into the wall outlet. 2. Position your unit at least 6 inches (16 cm) from walls, draperies, or any other objects that might prevent the proper flow of air in and out of your oxygen concentrator. The Oxygen concentrator should be ocated so...

3. Remove the power cord completely from the line cord strap, Make sure the power switch is in the “OFF” position, and insert the plug into the wall outlet. The unit is double insulated to guard against electric shock. A WARNING Improper use of the power cord and plugs can cause a burn, fire or other electric shock hazards. Do not use the unit if the power cord is damaged. OPERATING YOUR MIC CONCENTRATOR A DANGER Oxygen causes rapid burning. Do not smoke while your oxygen concentrator is operating, or when you are near a person utilizing oxygen therapy. Keep the oxygen concentrator at Least 5...

Filter Sponge and Oxygen Outlet Connector The air filter and connector should be cleaned at least once a week. To clean, follow these steps: 1. Remove the filter sponge, which is located on the back of the unit. Remove the oxygen outlet connector (if used) . 2. Wash in a solution of warm water. Don’t use any detergent. 3. Rinse thoroughly with warm tap water and towel dry. The filter should be completely dry before reinstalling. CAUTION — To prevent product damage, do not attempt to operate the unit without the filter sponge or while the filter sponge is still damp. Exterior Cabinet A WARNING To...

Spisi 39 1714 Heitenried, FR Switzerland

DECLARATION OF CONFORMITY Product Designation: Oxygen Concentrator Manufactory: Foshan MIC Medical Technology Co., Ltd EC authorized representation CGI Business Trading Inh. Herr Leizhang, Huegel Str. 73, 60433 Frankfurt am Main, Germany Spisi 39 1714 Heitenried, FR Switzerland