RSG FS SERIES
4Pages

TECHNICAL DATASHEET RSG FS SERIES PARTICULATE RESPIRATORS Description The RSG FS Series Particulate Respirators provide effective respiratory protection for use in industries where workers will be exposed to dust particles and/or non-volatile liquid particles. ■ Tested and CE Approved to EN 149:2001+A1:2009 ■ Foldable, easy to store, the 7 dynamic parts of the mask provide excellent facial movement with maximum comfort. ■ The respirator provides effective filtration with low breathing resistance for consistent high quality performance ■ Dolomite dust test provides proven protection and comfort for a minimum of 8 hours. ■ Collapse resistant; ideal for work in warm and humid environments. ■ Stays securely in place - thus helping to provide a good, comfortable seal. ■ Soft foaming on the inside of the mask feels comfortable on the skin. ■ Specially designed nose dip which keeps it's flexibility even after prolonged usage and fits any nose shape or size. ■ Elastic cotton headbands do not cause skin irritation and will not lose flexibility or pressure in hot or cold working conditions. ■ The special designed exhalation valve works efficiently to reduce the heat inside the mask and provides comfortable use in hot and humid conditions. ■ Comfortable and easy to use for workers with a wide variety of work security equipment such as helmets, safety glasses, ear plugs etc. ■ Extremely lightweight. Approvals These products meet the requirements of the European Community Directive 89/686/EEC (Personal Protective Equipment Directive) and are thus CE marked. 89/686/EG: European guideline for Personal protective devices (89/686/EG) Product approval by: INSPEC International Ltd – Notified Body number 0121 Production Control 11A: CIOP-Notified Body number 1437 Marking on the product: EN149:2001+A1:2009 CE1437 Standards These products meet the requirements of recently amended European Standard EN 149:2001 + A1:2009, filtering facepiece respirators for use against particles. They should be used to protect the wearer from solid and non-volatile liquid particles only. Products are classified by filtering efficiency and maximum total inward leakage performance (FFP1, FFP2 and FFP3), also by usability and clogging resistance. Performance tests in this standard include filter penetration; extended exposure (loading) test; flammability; breathing resistance and total inward leakage. Reusable products are also subjected to cleaning, storage and mandatory clogging resistance tests (clogging is optional for non reusable products). A full copy of EN 149:2001+A1:2009 can be purchased from your national standards body. RSG Safety BV | Marinus Dammeweg 38, 5928 PW VENLO, The Netherlands | www.rsgsafety.co

TECHNICAL DATASHEET RSG FS SERIES PARTICULATE RESPIRATORS Designations: R = Reusable NR = Non reusable (single shift use only) D = Meets the clogging resistance requirements Applications These respirators are suitable for use in concentrations of solid and non-volatile liquid particles up to the following limits: EN 149:2001+A1:2009 Exhalation Nominal Protection Classification Valve Factor Respiratory protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to hazards. Straps Elastic cotton textile Staples Steel Nose Foa...

TECHNICAL DATASHEET RSG FS SERIES PARTICULATE RESPIRATORS 1. 2. 3. 4. 5. Hold the respirator in hand with the nosepiece at your fingertips. Allow headbands to hang freely below hand. Cup the respirator firmly against your face with the nosepiece on the bridge of your nose. Stretch and pull the lower headband over the head and position below your ears. Stretch and pull the top headband on the back of your head above your ears Press soft nosepiece to conform snugly around the nose. To test fit for respirator without exhalation valve: cup both hands over the respirator and inhale sharply. A...

TECHNICAL DATASHEET RSG FS SERIES PARTICULATE RESPIRATORS Warnings and Use Limitations ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Always be sure that the complete product is: Suitable for the application; Fitted correctly; Worn during all periods of exposure; Replaced when necessary. Proper selection, training, use and appropriate maintenance are essential in order for the product to help protect the wearer from certain airborne contaminants. Failure to follow all instructions on the use of these respiratory protection products and/ or failure to properly wear the complete product during all...