RSP CONIC SPORT
2Pages

OUR GOAL IS TO MAKE THE MARKET´S BEST ECCENTRIC TRAINING MACHINES, FROM A BIOLOGICAL, MECHANICAL AND PHYSICAL PERSPECTIVE. What makes us different? The main characteristic of the Conical Pulley, due to the cone’s nature, is that the movement is accelerated with progressive weight. The rope’s radius decreases as it moves across the cone, progressively increasing resistance. The nature of the weight is inertial, that is, depending on how much power the user applies to the machine, power values will be higher or lower. This feature wide range of use of the subject, since we always work on percentages of individual power of the user. We can practise a great variety of exercises, making it possible to train every muscle group from a single machine by attaching different accessories to the end of the rope. Moreover, this machine’s weight range is really wide. We increase weight by working over the free cone radius with a roll-up rope, and also by shifting the inertia moment using 4 integrated masses on the disk (they can be extracted). The wider the radius, the lighter the weight; and the narrower the radius, the heavier the weight. This regulation is performed through a lengthwise rail along the cone. The moment of inertia is adjusted through the different masses integrated within the disk. There are three possible positions.

RSP CONIC SPORT TECHNICAL INFORMATION STANDARD EQUIPMENT 4 . Masses of aluminium (10 % moment of inertia every mass). 1 . Longitudinal rail with Block (to fit 0 of the cone). 1 . Grip hand and ankle. 4 . m rope ( Dyneema 4 mm ). 4 . Screws and 1 ring (to fx the machine to the wall). 1 . 120 cm high rail (to adjust the output block) 1 . Installation manual. Developed for the work of all the muscular groups. Made from aluminium. Rope without coeffcient of elasticity. Low-friction bearings and high quality pulleys. Weight adjustment on the cone radius, 13 weight positions. Moment of inertia...