DESIGNED FOR TRAINING THE ACTIONS OF BRAKING AND PUSHING THE UPPER BODY. Our machine with xed radius is for training the actions of braking and pushing the upper body. Fixed radius machines have the particularity that the axis is the same during the whole stroke, so all the variations in the acceleration of the machine depend on the capacity of the sportsman to apply force in that movement. They have a more structural orientation at a muscular level as they work slower than a conic pulley machine and allow for more time of tension as they have a lower acceleration and therefore slower movements. To emphazise on this fundamental characteristic in the xed radius machines is by using the 1x2 transmission that requires the athlete to apply more force and to increase the time of tension during the entire path of the movement. The less accelerated movements makes it easier at a technical level for people with little experience in inertial training, making this machine a great tool for the non- sporting population to benet from inertial training.

PRODUCT DOSSIER RSP WALL TECHNICAL INFORMATION STANDARD EQUIPMENT -RSP wall chassis. -2 eyebolts to vary the height of the ropes´ output. -1 eyebolt for a vertical shot of the rope. -4 aluminium masses. -Harken Carbo pulley of 29mm Ø in the chassis. -2 Harken Carbo pulleys of 40mm Ø for a 1x2 transmission. -4 meters high performance rope with lenght adjuster. -Hand grip. -Wall mounting kit. -Assembly manual. TECHNICAL SPECIFICATIONS -Designed to improve the capacity of acceleration and brake in the actions of pulling and pushing of the upper body. -1x2 transmission that allowss to increase the...