The RTI CT Ion Chamber 30 cm is a rugged, cylindrical, pencil-shaped vented ionization chamber designed for CTDI measurements. It is intended for measuring and monitoring the exposure output level of CT scanners, either in a phantom or free-in-air. CT Dose Index (CTDI) can be measured in accordance with IEC 61223-2-6. The RTI CT Ion Chamber offers outstanding energy linearity - within 0.5% - in the range 70-150 kV for the IEC 61267 radiation qualities RQR 5 to 10, RQA 5 to 10, RQT 8 to 10, and ISO N-150. With a precisely defined effective length (100 ±0.5 mm), the chamber enables accurate dosimetry in wide beams, even when repositioning is required. The optional LoniMover further enhances positioning accuracy and efficiency. Rubber O-rings provide secure and precise placement in the CTDI phantom. Connector type LEMO triaxial Cable 2 m, low noise triaxial Diameter 12 mm, 12.6 incl O-rings Specifications in this document may be changed without notice

The Mako Ion Chamber Module connects RTI Ion Chambers (such as CT Ion Chambers, DAP Chamber and Ion Chamber Magna Icc) to the Mako System. Automatic temperature and pressure compensation are built in. Mako Ion Chamber Module allows you to connect other brands of Ion Chambers as well. Mako PI Dongle - for existing Ion Chambers The Mako PI (Probe Identifier) Dongle is needed when connecting Ion Chambers to the Mako Ion Chamber Module. It contains the calibration data for your Ion Chamber. All RTI Ion Chambers (CT, DAP, Magna) are available in Mako versions where the PI Dongle is included. This...