RTI LoniMover™
2Pages

INDEPENDENT X-RAY QUALITY ASSURANCE RTI LoniMover™ CT Dose profiling made simple Due to the very wide beam and fixed table in Cone Beam CT, a detector must be moved very precisely through the beam to measure the right parameters. This can easily be done with the help of the RTI LoniMover™, in combination with a Pencil Ion Chamber or a CT Dose Profiler. Following the IEC standard IEC 60601-2-44 Ed. 3:A1, the Pencil Ion Chamber can accurately and reproducibly measure the full CTDI for Cone Beams. With the CT Dose Profiler, you will get the FWHM, Geometric Efficiency, and full CTDI with only one measurement through the beam. A smooth capture of results! RTI Group North America 33 Jacksonville Road, Bldg. 1 E-mail: sales@rtigroup.com E-mail: sales.us@rtigroup.com Copyright © RTI Group, RTI LoniMover™ 2022.08

INDEPENDENT X-RAY QUALITY ASSURANCE Top: Sweep mode with point dose detector. Bottom: Step mode with 100 mm Pencil Ion Chamber. Sweep or Step mode With the RTI LoniMover™, you can move a detector through any beam no wider than 300 mm. This is ideal to measure on Cone Beam CTs, which are CTs with beam width wider than 40 mm. In combination with the RTI CT Dose Profiler, it can push the detector through any X-ray field with a selected speed to measure the full dose profile and all interesting parameters, like FWHM and full CTDI. The RTI LoniMover™ can also use Step mode. This involves moving...