CARBOFILT series activated carbon panels SagiCofim Technical features Product Activated carbon filters mod. CAP are flat panels made of a supporting steel sheet frame superficially protected by electrolytic galvanization and micro-drawn grids. The activated carbons are positioned inside; there are also anti-sagging rigid elements. These panels have average activated carbon contents, they have very low pressure drops which means the energy consumption levels of the fan are minimal. The panels come in different thickness: 18, 23, 38, 48 mm. Top constructive quality, robust features and easy installation and maintenance operations assure wide application opportunities. Saturated activated carbons are re-generable through steam. Type Carbon Dimensions (mm) Carbon Nominal air flow rate Q Initial pressure CAP cont. drop Technical draft CARB loose carbon to charge exhausted panels *On request we supply aluminosilicate and zeolites for environmental and gas corrosion control. Technical features Carbon type P 2.0 Sagging humidity (ASTM D 2867) 3 % w/w Apparent density (ASTM D 2854) 520 kg/m3 Iodine number (AWWA B600) 950 mg/g Specific surface (BET Method) 1050 m2/g