In-line housings for filters up to F9 SagiCofim MULTIMOD Technical features Product MULTIMOD Multimod housings are modular and versatile systems that fit in cell filters, with soft and rigid pockets, and activated carbon filters mod. CAB. They are very easy to install and for this reason they are used in all those cases where it is necessary to insert a single or multiple (with a series of filters) filtration stage to obtain filtration levels up to F9. Multimod housings are made of galvanized sheet steel and are fitted with an access door with eccentric locking cam, with a closed cell neoprene gasket on the ledge. The filter is locked by a double eccentric lever. Perforated flanges are fitted at air inlet/outlet. • Filters choice: depending on the arrangement it is possible to install high efficiency filters SIGMA series, rigid pocket or soft pocket filters. • Prefilter: if needed, with the proper arrangement it is possible to have also prefilters with different depth. Depending on the efficiency required, the right filters are our PFE, PFS, PFO/E or PFO/S. • “MD 8” arrangement and relevant filters: once the kind of arrangement has been chosen, for example “version F”, the needed filters are the ones for the same version of MD5 + MD52 (i.e. one rigid pocket 287x595 plus one rigid pocket 595x595)