GAMMA series - disposable filter panels SagKofim Technical features PFP filter panels are fitted with media in glass fibers continuous and uniformly distributed and bonded with a special adhesive. The media have an increasing density in the air flow direction to assure a higher dust holding capacity and a lower pressure drop compared to similar models. The frame is made of strong punched cardboard with medium holding elements. Pressure drop levels are very low and this contributes to reduce the energy consumption of the fan. The filters are fitted with two different media: either 23 or 48 mm thick, which have clean filter pressure drop levels of 15 and 25 Pa, respectively. These filters are disposable type. They come in different sizes with different air flow rates to meet the requirements of most of the applications. Dimensions (mm) Nominal air flow rate Q Filtering Initial PFP surface pressure drop ABC m3/h m3/s x 10-3* m3 Pa € ✓ Product ready in Stock / *1 m3/s x 10-3 = 1 l/s Typical curves Dust holding capacity g/m2 Technical draft