SFD-SFDT
1 /16Pages

SFD-SFDT

SFD-SFDT
1 /16Pages

Catalog excerpts

SFD-SFDT-1

SFD - SFDT Fire - Fire & Gas Damper Ecoefficiency for Indoor Air Quality

 Open the catalog to page 1
SFD-SFDT-2

Fire - Fire & Gas Damper Marine - Oil & Gas Industry SGCjiCofilTI Type Approval Quality Our Quality Management System has been certified in accordance with the standard ISO 9001: 2008. Our company is monitored by RINA, a member of iQNet European network, and is appointed with the quality management system certificate for the fields of activity of design and production of filter, filter systems and air distribution components for HVAC systems. Environment Being involved with the production of equipment for indoor environment control and air filtration, it is natural for SagiCofim to consider...

 Open the catalog to page 2
SFD-SFDT-3

Fire - Fire & Gas Damper SagiCofim SFD - SFDT Fire and Fire & Gas dampers are SOLAS type - approved in Class A 0 - A 60. According to max dimension and to this classification, 3 models (01, 03 and 04) are available. They are used to prevent the spread of flame and smoke within ventilation and air condition duct systems for ships and offshore installations. The spring thermal release is fitted with a fuse (there also are other types of thermal fuse) which is set to melt at different temperatures (45 °C, 72 °C, 95 °C or 120 °C), thus allowing the torsion spring to close the blade, which is held...

 Open the catalog to page 3
SFD-SFDT-4

Fire - Fire & Gas Damper SagiCofim Blade section SFD - SFDT 01 blade section without fire protection Dampers can be supplied on request with special dimensions by multiple welded arrangement. The mechanical contractor must always provide thermal insulation on damper outside (for A 60 model)

 Open the catalog to page 4
SFD-SFDT-5

Fire - Fire & Gas Damper SagiCofim Damper operating range: ATEX area - 20 ° C ^ t s + 50 ° C - Vmax 15 m/s - Pmax 3000 PaSAFE area - 20 ° C ^ t ^ + 70 ° C - Vmax 25 m/s - Pmax 3000 Pa

 Open the catalog to page 5
SFD-SFDT-6

Fire - Fire & Gas Damper SagiCof’ im Dimensions of flanges and drilling * Intermediate holes, step 150 mm from centerline 4- Fixed holes at corner o Intermediate holes * Intermediate holes, step 150 mm from centerline

 Open the catalog to page 6
SFD-SFDT-7

Fire - Fire & Gas Damper SagiCofim Damper weights [Kg] Electric version: + 5 Kg for each actuator Pneumatic version: + 20 Kg for each system Average values valid for all standard types (approx. ± 5%).

 Open the catalog to page 7
SFD-SFDT-8

Fire - Fire & Gas Damper SagiCofim Torque requirements (Nm) for actuating systems selection Min. torque values for proper tightness at worst operating condition (P = 2000 Pa, v > 15 m/s) For SFD model: - 20%

 Open the catalog to page 8
SFD-SFDT-9

Fire - Fire & Gas Damper SFD - SFDT Performances Pressure drop and noise level 55 • Max noise level: 60 dB(A) • Standard pressure drop: 6 Pa With damper fully open and air speed of 5 m/s. • Max pressure drop: 55 Pa With damper fully open and air speed of 15 m/s. SFDT gas leakage according to EN1751 10000 Leakage test across closed blades Positive pressure Negative pressure Leakage test for casing

 Open the catalog to page 9
SFD-SFDT-10

Fire - Fire & Gas Damper SFD - SFDT Damper controls Type TE Electrical actuator Type TX Electrical ATEX zone approved actuator Marine Fire and Fire & Gas dampers can be provided with many different combinations of actuators - junction boxes - limit switches in order to fulfil to all technical specification or customer demand: • nominal actuator torque (5, 10, 15, 30 … Nm); • voltage input range from 24 V to 230 V AC/DC; • plastic, painted aluminium, galvanized steel or AISI 316 actuator case; • on/off spring return actuator with or without integrated micro switches, SPDT mechanical model; • different...

 Open the catalog to page 10
SFD-SFDT-11

Fire - Fire & Gas Damper SagiCofim Example 1: BELIMO BF on A60 plate * Actuator protrusion only. For total protrusion, please consider also plate protrusion. Electric actuators are fixed to levers protection carter by an universal plate (galvanized steel or AISI 316). This plate is designed to fix different type of actuators only switching its own orientation or using different fixing holes. Different type of installation: • BFL type through fixing holes 3, with a 180° plate rotation respect to plate position as shown in the example; • LF / BFN type through fixing holes 4, with a 180° plate rotation...

 Open the catalog to page 11
SFD-SFDT-12

SFD - SFDT Damper controls Type TP - Pneumatic actuator SFD - SFDT Fire and Fire & Gas dampers can be equipped with rotating pneumatic actuators (6 - 12 bar) and additional accessories such as solenoid valves and limit switches (mechanical, magnetic or inductive type). Actuator can be made of PTFE coated aluminium, painted steel, stainless steel or composite. Special version: ATEX approved pneumatic components Working condition Electrical failure Fire detection A typical pneumatic system is composed by: • a rotating piston with a specific even number of springs (according to the model); • a 3-ways...

 Open the catalog to page 12
SFD-SFDT-13

Fire - Fire & Gas Damper * Piston available in 3 sizes 15 Nm - 43 Nm - 132 Nm * Piston available in 3 sizes 15 Nm - 43 Nm - 132 Nm Both available for ATEX version. Custom configuration available. Extra and accessories • Check valve • In line filter • Manual by-pass valve • Heating cable • Manual override with detachable clutch

 Open the catalog to page 13
SFD-SFDT-14

Fire - Fire & Gas Damper SFD - SFDT Damper controls Type TM - Mechanical release and manual reset During normal operation, with the damper open, the fuse (metal red plate) holds the internal spring charged. The head of the disjunctor pin locks the external spring lever connected to the blade. In case of fire accident, the thermal fuse melts and frees the disjunctor pin movement by spring force. The pin moves towards the inner part of the damper and frees the external lever. This movement let the closure of the damper. The system can be resetted according to this procedure: • check damper condition...

 Open the catalog to page 14
SFD-SFDT-15

Fire - Fire & Gas Damper Marine - Oil & Gas Industry SagiCofilTI References Shipyards Barreras (Spain) Cantieri Apuania (Italy) Ferrol (Spain) Fincantieri (Italy) Flender Werft (Germany) Jurong (Singapore) Keppel Fels (Singapore) Lloyd Werft (Germany) Meyer Werft (Germany) Navantia (Spain) Rosetti Marino (Italy) Sembawang (Singapore) SMOE (Singapore) STX France (France) T. Mariotti (Italy) Owners Carnival Corsica Ferries Costa Crociere Cunard Finnlines Grimaldi Group Holland America Line Marina Militare Italiana Minoan Lines Norwegian Cruise Line P&O Radisson Seven Seas Renaissance Cruises Royal...

 Open the catalog to page 15

All SagiCofim catalogs and technical brochures

  1. LS-KS

    1  Page

  2. DUG-B_DUG-A

    2  Pages

  3. SA SA - LF

    2  Pages

  4. LMG - KMG

    1  Page

  5. AH-AS

    1  Page

  6. INER-ST

    8  Pages

  7. MPS

    2  Pages

  8. PK

    3  Pages

  9. JD

    3  Pages

  10. FLG

    2  Pages

  11. CANISTER

    4  Pages

  12. SMBA

    2  Pages

  13. CARBO

    1  Page

  14. PFA6/6/7/8/9

    1  Page

  15. PFA/4-PFA/5

    1  Page

  16. CAP

    1  Page

  17. MULTIMOD

    1  Page

  18. MODULO

    1  Page

  19. CT

    1  Page

  20. SAF

    1  Page

  21. CAB

    1  Page

  22. DIF OT_LS

    8  Pages

  23. DIF O.T.

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.