Sanosil Q-Jet CT20 Automatic 3D room disinfection unit www.sanosil.com

OPTIMUM HYGIENE Seamless 3D room and surface disinfection using an automated, airborne system The versatile all-rounder for small to large rooms Aerosol nozzle For a fine, dry and smoothly flowing airborne mist Compressor For substantial pressure and very little noise Connectable jet For additional coverage and superb fog distribution in the room Automatic measurement system For precisely measuring the filling level and liquid consumption Touchscreen For convenient and intuitive operation

CT20 PRODUCT DESCRIPTION Q-Jet CT20: Highlight of the last 20 years in aerosol device development The CT20 combines more than 20 years of experience in aerosol disinfection. The key feature is the well-proven compressor/nozzle technology, which generates a fine, dry disinfection mist. The compressor power can be adjusted, allowing fog to be produced just 2 metres away from the wall. This presents a major advantage, which nearly no other device with a similar output can match. A powerful turbine can, however, be switched on if the CT20 is required for a larger room. Its air jet functions as a...

AEROSOL DISINFECTION Ensure extra safety with complete disinfection The disinfection standard of the future The traditional spray-and-wipe disinfection method usually only achieves a coverage of 80-90%. This generates a risky gap in effectiveness. The additional aerosol disinfection with a CT-20 can eliminate this gap and defines a new disinfection standard for large areas. The CT20 offers flexibility for use in a wide range of industries and applications and consistently provides superior microbiological safety. Hospital & care Public transport Veterinary fields Emergency services Medical practices...

THE TECHNOLOGY IN A NUTSHELL Aerosol disinfection in brief Aerosol disinfection is a state-of-the-art and practical disinfection method. Aerosol disinfection complements traditional spray-and-wipe disinfection and is designed to treat indoor air and surfaces in a wide range of living areas as completely as possible. The Sanosil disinfectant is atomised into tiny droplets by a device, such as the CT20. They then flow throughout the treated room like a mist and settle on all surfaces without any gaps. Once a sufficiently high dose of disinfectant has been released into the room, the aerosol is...

WHY USE A CT20? Advantages of the CT20 compared to other aerosol systems The same device for all room sizes ? Compressors vs turbines Aerosol disinfection devices that are currently available on the market typically use either compressor/nozzle or turbine technology to produce mist. They both offer advantages and disadvantages. Compressor devices are ideal for smaller rooms thanks to their smaller mist cone, but they reach their limits in larger rooms when it comes to optimally distributing the aerosol in the room. By contrast, turbine devices provide a strong air flow and tend to simply blow...

DIFFERENT OPERATING MODES “The air is saturated with moisture at more than 10 ml/m3" Starting with normal room temperature and approx. 45% humidity, the air can absorb approximately 10 ml of liquid per m3. The humidity increases to approximately 80%, depending on the condition and absorbency of the walls. If this value is exceeded, there is a risk of sudden condensation. This not only wastes disinfectant. In the worst case, however, there is a risk of material damage due to dripping on the walls. In Automatic mode, the CT 20 has a high-precision humidity sensor that temporarily stops the device...

SANOSIL AG CH-8634 Hombrechtikon, Switzerland