Sanosil products for the Healthcare application field

Sanosil S-Linie The proven classics: Surface disinfectant with hydrogen peroxide and silver Hydrogen peroxide & silver booster: Special properties The Sanosil S line includes the products S003, S006 and S010 which differ in the concentration of the ingredients and thus also in the product strength. They are all based on a combination of stabilised hydrogen peroxide and effect-enhancing silver ions. The silver ions enhance the disinfecting effect of the hydrogen peroxide by up to 800% before it completely decomposes into water and oxygen. While this does not make the Sanosil S line the fastest-acting...

Sanosil S-line products Surface disinfectant with hydrogen peroxide and silver Product description: Ready-to-use surface disinfectant with depot and lasting effect for pre-cleaned surfaces. When to use: Standard applications, surface disinfection Contains: 1.5% hydrogen peroxide, 0.003% silver Effective against: Bacteria, yeasts, fungi, enveloped viruses (influenza, corona) Preferred application: Wiping/SanoWipes, targeted spraying Canister sizes: 5 kg, 10 kg, 25 kg, 1000 kg Exposure times: Bacteria: 5–15 minutes, yeasts: 5–15 minutes, fungi: 30 minutes, enveloped viruses (influenza & corona)...

Sanosil SD-Line The new generation: Surface disinfectant with hydrogen peroxide (silver free) & cleaning effect Hydrogen peroxide & surfactant booster: Special properties The Sanosil SD-line products (SD1 and SD8) are part of a new generation of surface disinfectants. They are based on a combination of stabilised hydrogen peroxide and effect-enhancing surfactants/surface-active substances. The properties of this formulation specifically meet the needs of the medical and care sector. The incorporated surfactants not only intensify and accelerate the effect of the hydrogen peroxide, but they also...

Sanosil SD-line products Surface disinfectant with boosted hydrogen peroxide (silver-free) Product description: Ready-to-use disinfectant for surfaces that are visibly clean When to use: Standard applications, surface disinfection Contains: 1.3% hydrogen peroxide, <1% surfactants and boosters Effective against: Bacteria, yeasts, viruses (enveloped including corona, influenza and noroviruses) Preferred application: Wiping/SanoWipes, spraying (foam) Canister sizes: 750 ml, 5 kg, 10 kg, 25 kg, 1000 kg Exposure times: Bacteria, enveloped viruses: 1 minute, yeasts, noroviruses: 3 minutes Special features:...

Sanosil Q Line: Aerosol disinfection 3D disinfection of entire rooms by automatic cold fogging Sanosil Q Line: Full-room disinfection Aerosol disinfection is a state-of-the-art and practical disinfection method. It is designed to enhance classical spray-wipe disinfection by treating indoor air and surfaces in a wide range of living areas as thoroughly as possible. The Sanosil disinfectant is atomised into tiny droplets by means of a special device, such as the CT20. They then flow as a mist through the entire treated room and settle on all surfaces without leaving any gaps. Once a sufficiently...

Sanosil Q-Jet devices ...for automated airborne room and surface disinfection Product description: Portable aerosol disinfector for small to medium-sized rooms Fogging technology: Compressor & micro nozzle For room sizes: 4–100 m3 Flow rate: 10–20 ml/min (can be switched) Droplet size: 5–15 μm Sound level: 50–60 dB Tank size: 900 ml Fogging cycle: Timer Dimensions: 295 x 220 x 250 mm Product description: High-end aerosol disinfector for small to large rooms (can be switched) Fogging technology: Compressor & micro nozzle, connectable turbine For room sizes: 6–600 m3 Flow rate: 10–50 ml/min (can...

Sanosil Q-Jet: Liquids Aerosol disinfectant for use with the Q-Jet devices (or similar) Product description: Ready-to-use aerosol disinfectant with hydrogen peroxide and silver ions When to use: Aerosol disinfection for increased hygiene requirements in accordance with AFNOR 72 /281 and DIN EN 17272 Contains: 7.5% hydrogen peroxide, 0.0075% silver Certified efficacy/exposure times: Bacteria: AFNOR NF T72-281: 40 + 90 minutes Yeasts: AFNOR NF T72-281: 40 + 90 minutes Fungi: AFNOR NF T72-281: 40 + 90 minutes Endospores: AFNOR NF T72-281: 50 + 180 minutes Preferred application: Sanosil Q-Jet C10/CT20...

Rapid S Mano Alcohol-based hand sanitisers & dispensers Rapid S Mano: Hand sanitiser with skin protection Sanosil Rapid S Mano is a fast-acting, alcohol-based disinfectant for hygienic hand disinfection in compliance with the requirements of the EN 1500 standard. Skin care and moisturising substances prevent the skin from drying out, even with repeated use. Rapid S does not contain any dyes or fragrances, making it suitable for use in the catering and food sectors as well as for medical and care applications. Rapid S Mano Product description: Alcohol-based hand sanitiser for hygienic hand disinfection...

SanoWipes Wipes from the dispenser system SanoWipes: for fast interim disinfection Sano Wipes are dry wipes in a dispenser bucket with a resealable lid. They are soaked in disinfectant/disinfectant cleaner before use and are then ready for use for several weeks. Sano Wipes are highly effective in absorbing dirt particles. Their fine pores ensure optimum and cost-effective wetting of the surfaces with the liquid. Sano Wipes dispenser Product description: Reusable dispenser bucket for use with Sano Wipes roll and liquids When to use: Rapid interim disinfection of smaller surfaces Material: 100%...

Sanosil water disinfection Controlling germs and biofilms in water systems Sanosil S-Line: Hydrogen peroxide with silver ions Sanosil Super 25 (high concentrate) and S015 (concentrate, no hazardous material) disinfectants are primarily used in water treatment and water system disinfection, etc. The combination of stabilised hydrogen peroxide and effect-enhancing silver ions offers distinct advantages in water systems compared to other methods: • Superior effect against biofilms and VBNC germs even at low dosages • Considerably less corrosion than with comparable use of other oxidising biocides,...