Santes Catalogue
1 / 2Pages

mull vmrw TAKING CARE Flue Gas Treatment Systems Flue Gas Trealmenl Systems are mainly used fo be fully in compliance with desired emission standards- These units are designed bcsed on the content of the waste or waste gas. All flue gases have different characteristics; therefore has to be considered individually. There are two main methods in the flue gas treatment systems; namely dry scrubber & wet scrubber. ■ Based on sorption principles; ■ Uses activated carbon or hydrated lime for the removal of heavy metals, dioxin & furan and acidic content of flue gas. • Used for removing particulate matter from flue gas with very nigh efficiencies, • Has jet pulse cleaning mechanism for self-cleaning, • Able to remove very small particles. Wet Scrubber are working with the principle of liquid spraying into gas t • Acidic content such as S02, HCI and HF, • Particulate matters. Venturi Scrubber: • Able to remove particles with high efficiencies, • Gas enters from the top of the unit and moves in the same direction with water, • Main removal is achieved in the throat section of the unit. For efficient removal, gas is passing thru the through with very high speed. Spray Towers or Tray towers are applied based on the pollutant and required removal efficiency. • Both gaseous pollutants and particulate matters can be removed in these towers.However.mainly used for gaseous • While water and flue gas creates countercurrent flow and interfere with each other treatment of pollutants take place. ■ In the wet scrubber unit,flue gas is quenched with NaOH solution in liquid droplets and solution is recycled and the system works as a closed circuit. • pH of the system adjusted automatically. Waste Incineration System Waste Incineration System Waste Incineration System Hazardous Waste Incineration System Organize Sanayi Bolgesi 690. Sokak No.60 Ankara/Turkey info@santesklima.com • www.santesklima.com

• Waste reduction efficency is 97% minimum. - Diesel, LPG, fuel oil natural gas can be used as fuel. • The system is equipped with optional automatic loading and ash removal mechanisms. • Energy can be recuperated end is used in the generation of hot wather, steam, superheated water, etc. ■ Spare parts are easily accessed and maintenance is easy. • Operational handicaps are eliminated thanks to PLC (Program Logic Control) • Flue gas treatments is achieved by means of dry or wet filtering units. • European emission standards are met. harmful gasses are treated in the gas filtering units The...