Transport and transport systems For the transport of samples and blood products The complete solution for mailing and transport Safe and guideline compliant

Transport case Testing and evaluation Primary container The complete packaging system has been positively evaluated by the German Federal Institute for Materials Research and Testing (BAM). For liquids, the primary container must be capable of withstanding an internal pressure that results in a pressure For this reason, it is necessary that only primary containers with a certificate of differential pressure tightness are used. fully complied with. Preanalytical components foam material ensures for a stable sample temperature in combination with Secondary packaging A wide aperture and a plastic...

Primary container The mailing boxes have been tested and approved by the German Federal Institute for Materials Research and Testing (BAM). For liquids, the primary container or secondary packaging must be capable of withstanding an internal pressure that results in a are fully complied with. fluid. In all cases, the first vessel must be entirely leakproof. For this reason, it is important that the correct combination of secondary packaging and primary container be selected. Secondary packaging • When transporting liquids, only plastic primary containers that have be used. In addition, absorbent...

Transport case & accessories Transport systems Transport case with wide aperture Article name Wide aperture as secondary packaging incl. 1 superabsorber pack *Order numbers for coloured caps available on request Article name Standard screw cap, neutral* Mailing container, round Separate absorbent liner Article name Transport case with plastic bag Packaging Standard screw cap, neutral* Separate absorbent liner Plastic bag with closure clip as secondary packaging incl. 1 superabsorber pack Standard screw cap, neutral Separate absorbent liner without lateral rims, Mailing container, square Transport...

Transportation systems Transportation systems For the internal transport of samples Transport case for the safe transport of samples within a hospital or laboratory. Efficient cooling of the samples over several hours can be achieved by storing the containers in a freezer compartment (see figure above). Not suitable for samples that cannot be frozen. By using the appropriate mailing box and absorbent liners (see below), the cool transport container fully complies offered that are optimally adapted to the internal logistics of the hospital or laboratory. racks. The container should be changed...

TRANS Control For the transport of blood products Transport Safe Patented locks on all sides prevent unintentional opening of the TRANS Control Optimal Spacious and sealable refrigerated transport box with additional special insulation for optimal and safe products. Additional eyelets on the edges facilitate sealing TRANS Control is used for the transportation of Protective caps prevent unintentional opening of the element erythrocyte concentrates, thrombocyte concentrates, fresh frozen plasma etc. The goods to be transported are kept at a constant temperature level without active tempering....

Ordering information TRANS Control Article name TRANS Control 4° TRANS Control 4° Frame TRANS Control 22° TRANS Control 22° Frame TRANS Control 37° TRANS Control 37° Frame TRANS Control -18° TRANS Control -18° TRANS Control -30° TRANS Control -30° Frame For transport Article name Transport box For four TRANS Control twin elements or one TRANS Control twin element with three TRANS Control frames with additional insulation, sealable, plastic inner part in the base and cover, carrying handle For mailing Article name TRANS Control Mono Box Insulated Neopor box for mailing one TRANS Control TRANS...