Group: Sartorius
Catalog excerpts
Application Note June, 2017 Keywords or phrases: Preparation of standards or solutions of defined concentration for analytical procedures Preparation of Standards – Easier than Ever with the Sartorius Cubis® MSA Dosing System Holger Densow* Sartorius Lab Instruments GmbH & Co. KG, Otto-Brenner Str. 20, 37079 Göttingen, Germany * Correspondence E-Mail: holger.densow@sartorius.com Abstract Preparation of standards, also called reference samples, of known concentrations is a common routine procedure in analytical laboratories. Internal or external standards with very low concentrations are used in these laboratories for highly sensitive quantitative analytical methods to exactly determine the concentration of chemical components in samples using highly sensitive quantitative analytical procedures. Find out more: https://www.sartorius.com/en/applications/life-science-research/sample-preparation/hplc-sample-pre
Open the catalog to page 1Preparation of standards of known concentrations is a common routine procedure in analytical laboratories. Internal or external standards with very low concentrations are used in these laboratories for highly sensitive quantitative analytical methods to exactly determine the concentration of chemical compounds in samples. External standards are separate samples used for comparison to test samples, whereas internal standards are added to the samples to be analyzed. Therefore, the concentration of such standards must be as accurate as possible to prevent subsequent errors in the determination...
Open the catalog to page 2Compared with known, fully automatic dispensing systems on the market, the product presented in this Application Note offers a number of decisive advantages. Fully automatic systems, which take care of dispensing fine powder, granules and homogeneous or heterogeneous mixtures, require exact knowledge of the dispensing properties of these substances. For example, the flowability, size, shape, compactness, density, tendency to aggregate and electrostatic properties of the particles must either be known or visually evaluated. Choosing the right dispensing head is not always easy given the many...
Open the catalog to page 3Chromeleon* 7.2 SR4 enables fully automated data management of any number of standards. Connection of the Cubis® MSA dosing system to Chromeleon is recommended for extending analytical laboratories’ capabilities for automation of workflows. Ultimately, automation signifies considerable time savings compared with manual data exchange while increasing process reliability. * ionex™ Chromeleon™ 7.2 Chromatography Data System (CDS) software is a trade mark D of company Thermo Scientific™ Germany Sartorius Lab Instruments GmbH & Co. KG Otto-Brenner-Strasse 20 37079 Goettingen Phone +49 551 308 0...
Open the catalog to page 4All Sartorius Group catalogs and technical brochures
-
OEM
52 Pages
-
Octet® R2 System
7 Pages
-
Unisart® CN 180 DX Membrane
4 Pages
-
Pipette Cleaning
1 Pages
-
continuous air monitoring
6 Pages
-
Pipette Essentials
2 Pages
-
Contamination in Pipetting
4 Pages
-
ABC of pipette tips
1 Pages
-
Vivaflow®
12 Pages
-
Vacusart
2 Pages
-
Sterisart® Sterility Testing
6 Pages
-
Sterisart® NF
4 Pages
-
Sterisart® Family
12 Pages
-
Speedcal Mobile
2 Pages
-
Sartocheck® 5 Plus Filter Tester
26 Pages
-
Rline® Dispenser Module
4 Pages
-
Quintix® and Secura®
24 Pages
-
Picus® and Picus® NxT
8 Pages
-
Midi Plus Pipette Controller
4 Pages
-
Microbiological QC Solutions
12 Pages
-
MA160 Moisture Analyze
8 Pages
-
Filter Papers
36 Pages
-
Cubis® II
12 Pages
-
Claristep® Filtration System
12 Pages
-
Arium® Mini
11 Pages
-
Ultrafiltration Family
96 Pages