Catalogs >
Sartorius Group >
The Sterisart® Universal Pump

The Sterisart® Universal Pump
8Pages

Catalog excerpts

The Sterisart Universal Pump ® The Right Equipment for Your Sterility Test

The Sterisart® Universal Pump - Convenience & Confidence Combined An intelligent concept for reliable results International pharmacopeias require the complete sterility of pharmaceutical products, such as parenteralia, that are injected into the blood stream or that otherwise enter the body below the skin surface. As a manufacturer of such products, you are required to supply proof of the sterility of each final product batch. Sterility testing by membrane filtration is the method of choice for all filterable sterile pharmaceuticals. The tests are typically performed using pre-sterilised,...

Open the catalog to page 3

Features Increased Safety and Reliability Special Software A unique motor principle has resulted in a closed pump chassis design, eliminating the need for ventilation of the motor. Therefore, the pump will not release any particles or microbes into cleanroom or isolator environments or cause turbulence in laminar-flow areas. This results in increased safety and reliability. The special software of the high-end version 16420 guides the user by individual menu prompts. For instance, two different programs can be selected currently (manual operating mode and manual operating mode with data...

Open the catalog to page 4

Technical Specifications Pump flow rate Power requirements Power consumption Pump with holding ring for bottles, container (W × D × H) Weight Basic version 16419 Upgraded version 16420 with display | user software Materials Base plate, lever, bow, rotor Housing, connection port, housing control unit, stand, fastening arm, holder ring for bottles Operating display Connecting cable Connector control unit Tarnish chrome Connector grommet Container for draining, plastic sleeve for lever Seals, gaskets, adhesiv

Open the catalog to page 5

Ordering Information Sterisart® Universal Pump and Accessories Order Number Sterisart® Universal pump, basic version Sterisart Universal pump, upgraded version with display | user software Ampoule tongs Holding ring for bottles Drain tubing Ampoule breaker Foot switch Plastic sleeve for lever Separate control unit Extension cable control unit Clamp for control unit Serial cable Cover for container draining (Sterisart sterility test units) Cover for container draining (Millipore sterility test units) Adapter draining container for Sterisart® units on Millipore pump Cover for electrical...

Open the catalog to page 6

Sterisart® NF sterility testing solutions Order Number Sterisart® system for liquids in closed, large volume containers such as bottles Sterisart system, with septum, for liquids in closed, large volume containers such as bottles Sterisart CA for liquids in closed, large volume containers such as bottles Sterisart system for liquids in open containers such as ampoules Sterisart system, with septum, for liquids in open containers such as ampoules Sterisart CA for liquids in open containers such as ampoules Sterisart system for liquids in closed, small volume containers such as vials...

Open the catalog to page 7

Germany Sartorius Lab Instruments GmbH & Co. KG Otto-Brenner-Strasse 20 37079 Goettingen Phone +49 551 308 0 F or further contacts, visit www.sartorius.com Specifications subject to change without notice. Copyright Sartorius Lab Instruments GmbH & Co. KG. Status: 11 | 2020

Open the catalog to page 8

The Sterisart® Universal Pump 8Pages

Catalog excerpts

All Sartorius Group catalogs and technical brochures

The Sterisart® Universal Pump
8Pages