Products Catalogue S.B.M.
24Pages

Implants & Instrumentations

SUMMARY MENISCUS REPAIR - MENIX® - MENIX® DUO implants 3 - MENIX® instrumentation 3 ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION - LIGAFIX® - Interference screw 4 - PULLUP®/ BTLOOP® - Adjustable juxta-cortical fixation system 5 - GraftTech® - Preparation station 5 - POWERTEX® Suture 6 - PULLUP®CLIP / PULLUP®TEX CLIP implants 6 - RetroTech® - Retrograde drill 7 - Oustide-Inside intrumentation 8 - Blind Tunnel instrumentation 9 - Optional instrumentation ACL 10 ROTATOR CUFF REPAIR - FIXIT® - Pre-loaded anchor 11 - FIXIT® Knotless - Threaded anchor 11 - POWERTAPE® flat suture 11 - Surgical -...

MENISCUS REPAIR Meniscal suture system All-Inside - MENIX® The MENIX® meniscal repair system is an innovation in the meniscal injuries treatment by All inside technique. Indeed, MENIX® combines : - Filled pins and anchors low profile (Ø0.6 mm) preserving meniscal tissue, - Flat sutures preserving tissus. The knotless system reduces the shearings, - Transparent protection cannula allowing to visualize the implant anchoring and also, to protect medical staff, - Reusable instrumentations respecting environment. Designation MENIX® DUO Meniscal suture system with two anchors MENIX® Meniscal...

ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION LIGAFIX® - Interference screws LIGAFIX® are bioabsorbable interference screws designed for tibial and femoral fixation in ligament reconstruction. Made of Duosorb® material (β-TCP & PDLLA), LIGAFIX® implants are osteoconductive and prevent inflammatory reactions. They are available in various diameters, lengths, composition and design, providing you with the right implant for your surgical technique. (4;10;16;25;29;31;32;33;34;36;37) LIGAFIX® 30 RESORBABLE INTERFERENCE SCREW - ROUND HEAD Designation Code LIGAFIX® 30 resorbable interference screw -...

ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION PULLUP® / BTLOOP® - Adjustable juxta-cortical fixation system S.B.M. offers an adjustable cortical fixation implants range adapting to all type of graft : - PULLUP® : 4ST - Sotf Tissue - BTLOOP® : Bone To Bone PULLUP® Adjustable Fixation System for Ligament Reconstruction in Cortical Tunnel = Ø 4.5 mm (For Soft-Tissue Graft) PULLU01201 PULLUP®XL Adjustable Fixation System for Ligament Reconstruction in Cortical Tunnel Ø 5 to 10 mm (For Soft-Tissue Graft) PULXL01202 GraftTech® - Preparation station The GratTech® station allows the grafts preparation...

ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTIONPOWERTEX® - Non-absorbable suture loaded with needle OWERTEX® The POWERTEX' suture loaded with needle can be used during ACL reconstruction to suture a single semitendinosus tendon harvest as well as a classic soft tissue transplants. Composition : - Suture loaded USP #2 (Meets USP except for diameter) - Semicircular needle 26 mm - Lengh : 90 mm - Material : UHMWPE Designation Code POWERTEX® non-absorbable suture loaded with needle for ligament anchoring - BLUE - USP#2 - L 90 cm SUTRPBLAG1 POWERTEX® non-absorbable suture loaded with needle for...

ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION RetroTech® - Retrograde drill RetroTech® is a retrograd drill specificaly dedicated to the ACL reconstruction All inside technique. It is used for the tibial and femoral tunnels. Reusable, the RetroTech® drill forms part of the S.B.M. instrumentation eco-responsible design strategy. Designation Code RetroTech® retrograde drill LIG9000294 RetroTech® Ø 4.7 mm cannulated drill bit PULL000391 RetroTech® sterilization basket including lid and silicone holders PANIERETRO RetroTech® complete instrumentation set PULLFOR001 Optional instrumentation...

ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION Complete Outside-In Instrumentation set Designation Rigid guide pin Ø 0.9 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X1 Rigid guide pin Ø 0.9 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X5 Rigid guide pin Ø 0.9 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X10 Rigid guide pin Ø 1.4 mm - L 300 mm for screwdriver Ø 9-10-11 mm screws X1 Rigid guide pin Ø 1.4 mm - L 300 mm for screwdriver Ø 9-10-11 mm screws X5 Rigid guide pin Ø 1.4 mm - L 300 mm for screwdriver Ø 9-10-11 mm screws X10 K-wire guide pin Ø 2.5 mm - L 300 mm for drill bits X1...

ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION Designation Rigid guide pin Ø 0.9 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X1 Rigid guide pin Ø 0.9 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X5 Rigid guide pin Ø 0.9 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X10 Rigid guide pin Ø 1.4 mm - L 300 mm for screwdriver Ø 9-10-11 mm screws X1 Rigid guide pin Ø 1.4 mm - L 300 mm for screwdriver Ø 9-10-11 mm screws X5 Rigid guide pin Ø 1.4 mm - L 300 mm for screwdriver Ø 9-10-11 mm screws X10 K-wire guide pin Ø 2.5 mm - L 300 mm for drill bits X1 K-wire guide pin Ø 2.5 mm - L 300 mm for...

ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION Optional Instrumentation Designation Code Eyelet pin Ø 2.5 mm - L 300 mm X1 LIG9000031-01 Eyelet pin Ø 2.5 mm - L 300 mm X5 LIG9000031-05 Eyelet pin Ø 2.5 mm - L 300 mm X10 LIG9000031-10 Eyelet pin Ø 2.5 mm - L 400 mm X1 LIG9000041-01 Eyelet pin Ø 2.5 mm - L 400 mm X5 LIG9000041-05 Eyelet pin Ø 2.5 mm - L 400 mm X10 LIG9000041-10 Super elastic guide pin Ø 0.8 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X1 LIG9008300-01 Super elastic guide pin Ø 0.8 mm - L 300 mm for screwdriver Ø 6-7-8 mm screws X5 LIG9008300-05 Super elastic guide pin Ø 0.8 mm...

ROTATOR CUFF REPAIRFIXIT® / FIXIT® KNOTLESS - Pre-loaded and knotless suture anchor FIXIT® is a line of ready-to-use anchors for tendinous tissue fixation in arthroscopic rotator cuff repair. Available : - In 3 sizes - Pre-loaded anchor : FIXIT® - Bioabsorbable threaded anchor: FIXIT® Knotless. Designation Code FIXIT® threaded anchor mounted on screwdriver 0 4.5 mm EPA0047CLA FIXIT® threaded anchor mounted on screwdriver 0 5.5 mm EPA0055CLA FIXIT® threaded anchor mounted on screwdriver 0 6.5 mm EPA0065CLA Designation Code FIXIT® Knotless threaded anchor single interference 0 4.5 mm...