Grade 4-titanium powder for dentures manufacturing in a laser melting process. Starbond Ti4 Powder 45 is biocompatible, with high strength properties and a wide range of indications. Perfectly suitable for the production of bars, crowns, bridges and partial dentures. Ű Ű Compliant with DIN EN ISO 5832-2 Composition in percent by mass Ti: 99 % N, C, H, Fe, O: <1 % VERSION Starbond Ti4 Powder 45 Light metal alloy with high corrosion-resistant. A very high strength and at the same time low weight characterizes this alloy. Ű Composition in percent by mass Ti: 89 %, Al 6 %, V 4 %, N, C, H, Fe, O: <1 % VERSION Starbond Ti5 Powder 45 TECHNISCHE EIGENSCHAFTEN**: Proof stress (Rp0.2) Ultimate tensile strength Elongation Elastic modulus Vickers hardness Density Melting range CTE (25 - 600 °C) Laser weldable Type (DIN EN ISO 22674) TECHNISCHE EIGENSCHAFTEN**: Proof stress (Rp0.2) Ultimate tensile strength MPa Elongation Elastic modulus Vickers hardness Density Melting range CTE (25 - 600 °C) Type (DIN EN ISO 22674) NON-PRECIOUS METAL POWDER (NPM) Composition in percent by mass Ti: 89.4 %, Al 6.2 %, V 4 %, N, C, H, Fe, O: >0.4 % ADVANTAGES: Biocompatible, high strength with low density, corrosion resistant TECHNICAL PROPERTIES**: Proof stress (Rp0.2) Ultimate tensile strength Elongation Elastic modulus Vickers hardness Density Melting range High-quality superalloys for 3D technology for the manufacture of highly complex restorations in mass production using PBF systems. NON-PRECIOUS METAL POWDER (NPM) S&S Scheftner GmbH Dekan-Laist-Straße 52 55129 Mainz / Germany E-Mail: [email protected] online:

STARBOND EASY POWDER CoCrW dental alloy powder for dentures manufacturing in a laser melting process. The user benefits from the same outstandingcharacteristics of our Starbond Easy dental alloy and can thus work in a proven system. Positive processing properties and the alloy components ensures maximum flexibility in ceramic selection and also guarantees excellent veneering. Ű Composition in percent by mass Co: 61 % Cr: 27.5 %: W: 8.5 % Si: 1.6 % C, Fe, Mn: <1 % NON-PRECIOUS METAL POWDER (NPM) COCR ALLOY POWDER NON-PRECIOUS METAL POWDER (NPM) NON-PRECIOUS METAL POWDER (NPM) COCR ALLOY POWDER...