Pressure Moulding Technique DURASPLINT® LC The transparent light-curing resin for adjustment of DURAN® splints.

Pressure Moulding Technique A strong team for transparent results. The fabrication of adjusted splints is now a clear case: The light-curing resin DURASPLINT® LC provides results of outstanding transparency without the risk of yellow discolouration after light-curing. Our product solutions around DURASPLINT® LC perfectly match: Fabrication becomes even more comfortable for you, making adjustment, finishing and polishing of occlusal splints much easier. DURASPLINT® LC The transparent resin is especially suited for adjusting DURAN® splints – using the recommended material thickness of 1.5 mm. With...

LC Primer • light-curing primer for preparing DURAN® splints /#lc Primer, 10 ml, with brush 3263 before building-up with DURASPLINT® LC or CLEAR-BLOKKER® • polymerisation in the spectral range of 350-450 nm (LC-6 Light Oven) LC Insulation • facilitates modelling DURASPLINT® LC for adjusting DURAN® splints • can also be used for insulation of the antagonist model SD Polishing paste • best suited for polishing of DURASPLINT® LC • SD Polishing paste A: polishing paste for resin; also suited for metals and wires • SD Polishing paste B: high-gloss polishing paste H SD Polishing paste A, bar of...

Light-curing high-transparent gel for the combined use with DURASPLINT® LC to correct splint adjustments. The gel fits perfectly for the application of highly accurate contact surfaces or the insertion of canine guidance. In addition, it can be used to remove or fill up air inclusions or to fix support elements, such as the IST® fixing elements. For polymerisation an UV-LED lamp with a wavelength range of 360-420 nm or a light-curing device such as the LC-6 Light Oven is required. For preparation the LC primer can be used. LED polymerisation lamp with 14 LEDs, developed for fixing and initial...