Pressure Moulding Technique

Pressure Moulding Technique

Pressure Moulding Technique More than 50 years of competence and experience. Tried and tested. Our thermoforming materials for medical applications are made of biocompatible and well-tolerated materials.The wide range of material offers you the right product for any application. A bar code is applied to each blank, making processing quick, easy and safe. Pressure Moulding Technique

Pressure moulding technique Pressure Moulding Technique BIOSTAR® Versatile pressure moulding machine for all applications in dental pressure moulding and orthodontics, equipped with scan technology and 6.0 bar working pressure, adjustable by pressure reducing valve on the unit. The unique thermally controlled infrared heater reaches working temperature in one second. All parameters such as temperature, heating and cooling times are programmed by reading the scanner or entering the corresponding code. The coloured 3.2" LCD display with a resolution of 320 x 240 pixel leads you through the single...

MINISTAR S® The compact pressure moulding unit MINISTAR S® equipped with scanning technology: scanner reads the coded material, allowing programming of all important parameters such as heating time, temperature and cooling time. Precise pressure moulding results are reached in record time thanks to the extremely fast, patented heater and working pressure of 4.0 bar, adjustable via pressure regulator. Equipped with user-friendly membrane keypad and large display which indicates and monitors all operating parameters. Technical data Voltage / power: 230/115/100 V, 750 W Working pressure: 0.5 - 4.0...

Pressure moulding material BIOCRYL® C Break-resistant acrylic material of pure PMMA, monomer-free, without allergenic irritants, bonds to acrylic. Application Immediate dentures, orthodontic plates, retention plates and denture bases. 2.0 x 125 mm, clear BIOCRYL® Form X Tough-elastic material, does not bond to acrylic, blue. Pressure Moulding Technique Application Radiopaque material for the exact visualisation of the clinical situation in computer tomography. The material closely adapts to the tooth surface and its outline is sharply imaged. 1.5 x 125 mm, blu

DURAN® Hard-elastic transparent material, bonds to cold-curing resins such as DURASPLINT® and DURASPLINT® LC. Apply LC primer prior to using DURASPLINT® LC. Does not require pre-drying. Application Miniplast splints, occlusal splints, interim and fluorisation splints, X-ray templates, ant-snoring appliances, reinforced anterior section of sports mouthguard. 0.4 x 125 mm DURAN®+ Hard-elastic transparent material, bonds to cold-curing resins such as DURASPLINT® and DURASPLINT® LC. Apply LC primer prior to using DURASPLINT® LC. With integrated insulation foil. Does not require pre-drying. Application...

DURAN®+ A2 pd Proven DURAN® quality in aesthetic colour (VITA A2), with integrated insulation foil. Already pre-dried and vacuum sealed for instant use. Application Tooth coloured temporaries, splints for planning and demonstration for aligner treatments 0.5 x 125 mm DURAN®+ white pd Proven DURAN® quality in white (VITA OM1), with integrated insulation foil. Already pre-dried and vacuum sealed for instant use. Application Cosmetic splints Pressure Moulding Technique

CA® Pro Three-layer aligner material with flexible elastomer core in a hard-elastic double shell which is able to maintain a constant force level at a minimal loss of power. The flexible elastomer layer ensures high elasticity and break resistance, while reducing initial force and increasing patient comfort. CA® Pro can be used as single-splint aligner material and within the 3-splint-system according to the CA® protocol. 0.5 x 125 mm CA® Pro+ Three-layer aligner material with flexible elastomer core in a hard-elastic double shell which is able to maintain a constant force level at a minimal...

CA® Foil High-quality, transparent, hard-elastic material for gentle tooth alignment with aesthetic splints in the CA® system. Material with original CA® labelling stating the thickness: extra soft (0.4 mm), soft (0.5 mm), medium (0.625 mm) and hard (0.75 mm). extra soft, 0.4 x 125 mm CA® Retention foil pd CA® Retention foils for long-term use, pre-dried and individually vacuum sealed. Material with original CA® labelling stating the thickness (0.75 and 1.0 mm). 0.75 x 125 mm Pressure Moulding Technique

DURASOFT® pd Break- and abrasion-resistant, transparent compound material with a hard and soft side. Hard side bonds to acrylic. Already pre-dried and vacuumsealed for instant use. Application Minplast splints, bruxism splints, occlusal splints with soft inner side, intra-oral anti-snoring devices, orthodontic splints. 3342.1 DURASOFT® blue pd Application Specifically designed for simple fabrication of coloured intra-oral anti-snoring devices. Blue colour increases aesthetics. 1.8 x 125 mm hard / soft: 0.9 mm / 0.9 mm Pressure Moulding Technique The proven break and abrasion-resistant material...

DURASOFT® seal Pressure moulding material made of thermoplastic polyurethane for use with DURASOFT® pd. Forms a robust inner layer and provides high quality hard-soft splints with excellent resistance against discolouration. Available in clear, blue and magenta. Application Discolouration-resistant inner layer for DURASOFT® pd splints. Specifically designed for long-term use splints such as intra-oral anti-snoring devices. 0.1 x 125 mm, magenta BIOPLAST® Soft-elastic rubber like material, does not bond to acrylic, clear transparent. Hardness Shore A: 85. Application Duplication moulds for situation...

BIOPLAST® bleach Soft pliable rubber like material, specifically destined for fabrication of bleaching splints. Material does not bond to acrylic. Hardness Shore A: 92. 1.0 x 125 mm BIOPLAST® Color Soft, pliable rubber like material, does not bond to acrylic. Hardness Shore A: 85. Application Coloured sports mouth guards, positioners Color-Set Pressure Moulding Technique