Pressure Moulding Technique
36Pages

{{requestButtons}}

Catalog excerpts

Pressure Moulding Technique - 1

Pressure Moulding Technique Catalogue pressure moulding technique Material, laboratory equipment and accessories

Open the catalog to page 1
Pressure Moulding Technique - 2

Pressure Moulding Technique

Open the catalog to page 2
Pressure Moulding Technique - 3

50 years of competence and experience. Tried and tested. Our pressure moulding material has been tested in terms of cell biology according to the international standards DIN EN ISO 10993 and 7405 and has been released for clinical purposes. The bar code on each blank ensures quick and simple handling.

Open the catalog to page 3
Pressure Moulding Technique - 4

Pressure Moulding Technique BIOCRYL® M Hard-elastic, monomer-free material, without allergenic irritants, bonds to acrylic. Application Orthodontic plates and retainers H 2.0 x 125 mm U 2.0 x 125 mm U 2.0 x 125 mm U 2.0 x 125 mm U 2.0 x 125 mm U 2.0 x 125 mm 10 pieces *5 x 2 pieces O Multicolor-Set* Q Polka-Dots 0 Zebra ® Rainbow © Tiger © Camouflage BIOCRYL® C Break-resistant acrylic material of pure PMMA, monomer-free, without allergenic irritants, bonds to acrylic. Application Orthodontic plates and retainers *10 /100 pieces ** 10 pieces C€ ^newiF BIOCRYL® Form X Visco-elastic...

Open the catalog to page 4
Pressure Moulding Technique - 5

DURAN® Hard-elastic transparent material, bonds to DURASPLINT® and DURASPLINT"' LC. Apply LC primer prior to using DURASPLINT® LC. No pre-drying required. Application Miniplast splints, occlusal splints, inteiim and fluoiisation splints, drilling/X-ray templates, ant-snoring appliances, invisible retainers, temporary downs and bridges. DURAN®+ Hard-elastic transparent material, bonds to DURASPLINT® and DURASPLINT® LC. Apply LC primer prior to using DURASPLINT® LC. With integrated insulation foil. No pre-drying required. Application Miniplast splints, occlusal splints, interim and...

Open the catalog to page 5
Pressure Moulding Technique - 6

Pressure Moulding Technique ^NEWiF DURAN®+ white pd New material in proven DURAN® quality, now available in white (Vita OM1). With integrated insulation foil. Already pre-dried and vacuum sealed for instant use. Application Cosmetic splints DURAN®+ A2 pd New material in proven DURAN® quality, now available in aesthetic colour (VITA A2). With integrated insulation foil. Already pre-dried and vacuum sealed for instant use. Application Tooth coloured temporaries, splints for planning and demonstration for aligner treatments DURASOFT® pd Unbreakable, abrasion-resistant, transparent...

Open the catalog to page 6
Pressure Moulding Technique - 7

DURASOFT® blue pd The proven break and abrasion resistant material in blue-transparent colour. Already pre-dried and vacuum sealed for instant use. Application Specifically for simple fabrication of coloured intra-oral anti-snoring devices. Blue colour increases aesthetics. U 1.8 x 125 mm O blue #3347 Pressure Moulding Technique DURASOFT® seal Clear pressure moulding material made of thermoplastic polyurethane for use with DURASOFT® pd. Forms a robust inner layer and provides high quality hard-soft splints with excellent resistance against discolouration. Also available in blue and...

Open the catalog to page 7
Pressure Moulding Technique - 8

BIOPLAST® XTREME Kit* Two different degrees of hardness in one pressure moulding blank thanks to the integrated reinforcement in the delicate anterior region. Absorbs hard and flat impacts in contact sports. V-shaped harder insert for variable size of front tooth protection. Kits come with 1 BIOPLAST® XTREME 5.0 x 125 mm, 1 bag of 15 g CETRON® cleansing powder, 1 BIOPLAST® insulating agent, retainer box. U BIOPLAST® XTREME Kit O blue #3284 * only for MINISTAR® from 4/92 and BIOSTAR® from 4/99 C€ BIOPLAST® XTREME PRO Kit* For professional sports where hard and flat impacts often...

Open the catalog to page 8
Pressure Moulding Technique - 9

The pioven XTREME mateiial foi the fabiication of individual mouth guard is available in many individual designs. A new manufacturing technology enables photo-realistic, multi-colour designing. Material does not bond to acrylic. 5 pieces * only for MINISTAR® from 4/92 and BIOSTAR® from 4/99 BIOPLAST® Color Soft, pliable iubber like material, does not bond to acrylic. Application Coloured mouth guaids, positioners It 3.0 x 125 mm O blue-transparent #3356 Piessure Moulding Technique BIOPLAST® Multicolor Soft, pliable rubber like material, does not bond to acrylic. Application Coloured...

Open the catalog to page 9
Pressure Moulding Technique - 10

BIOPLAST® bleach Soft pliable rubber like material, does not bond to acrylic, clear-transparent. Soft pliable rubber like material, best suited for fabrication of bleaching splints. Material does not bond to acrylic. Pressure Moulding Technique Application Duplicating moulds, mouth guard, bruxism splints, positioner, bleaching splints, OSAMU-Retainer® Manual ..Diagnosis of occlusion in bruxism“ (Kanagawa Dental College, Japan) can be found at www.scheu-dental.com/en/downloads/other BRUX CHECKER® acc. to Prof. Sato Foil with one-side colour coating for analysis and therapy planning as well...

Open the catalog to page 10
Pressure Moulding Technique - 11

IMPRELON® Hard material, not elastic, bonds to acrylic. Application Material in clear and opaque for impression and medical trays, material in white for chin caps and bite registration. 10 pieces * 10/100 pieces C€ IMPRELON® S pd Extremely break and abrasion resistant material. New formulation! Already pre-dried and vacuum sealed for instant use. Application OSAMU-Retainer®, miniplast splints, retention splints 10 pieces * 10/100 pieces C€ Pressure Moulding Technique OSAMU-Retainer® Kit Transparent retainer acc. to Dr. Yoshii. Pressure-moulded using BIOPLAST® 1.5 mm and IMPRELON® S pd...

Open the catalog to page 11
Pressure Moulding Technique - 12

Pressure Moulding Technique COPYPLAST® Visco-elastic material, opaque, does not bond to acrylic. Application Duplicating moulds, bleaching splints, bracket transfer trays, copings, moulds for temporary crowns and bridges HARDCAST® Hard-elastic material, does not bond to acrylic, combustible leaving no residue, opaque. Application Copings, spacer foil for bleaching splints COPYPLAST® C Transparent, visco-elastic material, unbreakable and abrasion resistant, does not bond to acrylic. Application Long term and invisible retainers, orthodontic splints

Open the catalog to page 12
Pressure Moulding Technique - 13

Spacer Foil For fabrication of copings, will be removed before embedding the model, clear. ISOFOLAN® Ensures optimum insulation for plaster against acrylic in the pressure moulding technique. Best suited as spacer foil when pressurising hard-elastic material for splints. Pressure Moulding Technique Skin Packaging Protection packaging for sending out high quality models, consisting of cardboard and coating foil. U Skin Packaging #3206 Protection cover for study and orthodontic models 100 pieces

Open the catalog to page 13

All Scheu-Dental GmbH catalogs and technical brochures

  1. myTAP™

    2 Pages

  2. MINISTAR S®

    8 Pages

  3. The Bite Fix

    1 Pages

  4. BIOSTAR®

    8 Pages