antifect® AF (N)
2Pages

{{requestButtons}}

Catalog excerpts

antifect®  AF (N) - 1

Quaternary ammonium compounds-based, aldehyde-free concentrate for disinfecting and cleaning non-invasive medical devices and surfaces. good spectrum of activity (incl. noroviruses) The product is suitable for disinfecting surfaces and medical devices. As a long-established product, it is used in all hospital areas and can be combined with schülke s&m cleaning additive and schülke s&m care additive. As this product contains cationic active ingredients, the combination with cleaning agents, cleaning additives or wipe care products can affect the microbiological effectiveness and cause problems during application. schülke should therefore be consulted before attempting mixing the products. Instructions for use Prepare the working solution in the desired concentration. Wet clean surfaces of medical devices, floors and other wipeable surfaces. Ensure complete wetting and maintain the surface moist during the entire exposure time. Ensure that all visible dirt is removed before disinfection. Allows dosing via centralized and decentralized dosing devices. schülke dosing aids can be used for dosing. After completing the work, dispose of the working solution and clean the equipment thoroughly with water. Depending on the type of floor, additional care may be useful. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices! Microbiological efficacy in accordance with VAH - dirty conditions virucidal against enveloped viruses Application areas Contact time limited spectrum virucidal activity in accordance with VAH - dirty conditions EN14476 - clean conditions EN14476 - clean conditions

Open the catalog to page 1
antifect®  AF (N) - 2

antifect AF (N) Product data Environmental information Composition: 100 g concentrate contains the following active substances: 18 g Alkyl (C12-16) dimethylbenzyl ammonium chloride (ADBAC/BKC (C12-C16)), 1.2 g Polyhexamethylene biguanide (monomer: 1.5-Bis(trimethylene)-guanylguanidinium monohydrochloride) (PHMB) Labelling according to Regulation (EC) No. 648/2004: 5 - 15 % nonionic surfactants, perfumes schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards....

Open the catalog to page 2

All Schülke & Mayr catalogs and technical brochures

  1. dentavon®

    2 Pages

  2. aspirmatic®

    2 Pages

  3. antifect® N

    2 Pages