aspirmatic®
1 / 2Pages

Cleaning, disinfection and total care for all dental system units and amalgam separators. Use daily 1-2 times. suitable for all amalgam seperators (eg Dürr, Metasys) can be used in all treatment units (eg Sironna, KaVo, Castellini, etc.) does not foam Application areas aspirmatic® is used for the daily cleaning, disinfection and care of all dental system units and amalgan separators. Use aspirmatic® in a 2% solution at noon and at the end of the day for a cleaning disinfection. Use 2 l in-use solution of aspirmatic® for every dental system unit and use in combination with the schülke dental application aid. To make up a 2 l in-use solution add 40 ml aspirmatic® to 1960 ml cold water. Dilute the product with cold water to get the required application concentration. Suck 1 1/2 litres of in-use solution through the suction hoses and pour the remaining 1/2 litre in the rinse basin. Leave to soak for a minimum of 60 minutes, or overnight. We recommend to use or aspirmatic® cleaner 1-2 per week instead of the aspirmatic®. Microbiological efficacy Efficacy Contact time in accordance with VAH - dirty conditions EN13727, EN14561 - dirty conditions EN13624, EN14562 - dirty conditions Contact time virucidal against enveloped viruses in accordance with VAH - dirty conditions in accordance with DVV (German Registered Association for Combating Viral Diseases)//RKI Guideline

aspirmatic Product data Expert opinion and information Composition: 100 g concentrate contains the following active substances: 7,5 g dioctyl dimethyl ammonium chloride. Labelling according to Regulation (EC) No 648/2004: < 5 % non-ionic surfactants, < 5 % soap. Please visit our website for an overview of all available literature/reports on the product: www.schuelke.com. For individual questions: Application Department Phone: +49 40 52100-666 E-Mail: info@schuelke.com Chemical-physical data Color Flash point Viscosity, dynamic Special advice Always read the label and product information...