Alcohol-based, rapid disinfection of non-invasive medical devices and surfaces. broad efficacy within very short time Contact time virucidal against enveloped viruses Application areas The product is suitable for disinfecting medical devices and other surfaces. Our classic product among the rapid disinfectant oroducts is suitable for disinfecting near-patient surfaces with an increased risk of infection that require short exposure times. limited spectrum virucidal activity in accordance with VAH Guidelines with short contact times Instructions for use Apply undiluted to the surface, wipe and allow taking effect. Ensure complete wetting and maintain the surface moist during the entire exposure time. Ensure that all visible dirt is removed before disinfection. Maximum yield of 50 ml/m². For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices! Microbiological efficacy Efficacy Contact time EN13727, EN16615 - dirty conditions in accordance with VAH Guidelines with short contact times EN14348 - dirty conditions in accordance with DVV (German Registered Association for Combating Viral Diseases)//RKI Guideline • IHO listed • VAH certificate • ÖGHMP certificat

mikrozid AF liquid Product data Composition: 100 g solution contains the following active substances: 25 g Ethanol (94 %), 35 g Propan-1-ol Labeling according to Regulation (EC) No. 648/2004: perfumes Chemical-physical data Related Products • mikrozid® AF wipes • mikrozid® sensitive liquid • schülke wipes • schülke wipes safe&easy Environmental information Flash point Viscosity, dynamic schülke manufactures products economically and with advanced, safe and environmentally friendly production processes while at the same time maintaining our high quality standards. Expert opinion and information...