Power Entry Modules with Line Filter
1 / 8Pages

Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 or C18 with Filter, Protection Degree IP65 into the Appliance, Fuseholder 1- or 2-pole, Front or Rear Mounting IEC connector C14 or C18 with filter Screw-on from front side With V-Lock Connection white 5707.xxxx.xxx.22 with IP54 V-Lock cord connection - Panel mount : Screw-on version from front or rear side , Screws with sealing are included - 4 Functions : Appliance Inlet protection class I or II , Line filter in standard and medical version , Fuseholder for fuse-links 5 x 20 mm , IP65 protection into the appliance - For front side mounting versions a sealing kit IP54 for the power supply connection is available as an accessory: 4700.0021 - Option suffix ".22" offers IP54 for the power input in combination with V-Lock cordsets - Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - Sealed power entry module Strong in Design and Safety IP 65 protection to the appliance IP 54 protection to the cord connection from front side white 5707 with IP54 Inlet Gasket Extreme robust design All single elements are already wired Screw type fuse carrier, slotted With EMC-shield Especially for applications in rough environments (see technical data) For applications according IEC/UL 62368-1 we recommend variants with bleed resistor Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Other versions on request - Class X1- and Y1-capacitors for enhanced withstand voltage Medical Version (M80) Additional factory-mounted sealing (IP54) of power input Version with current rating 3 A pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S 1 - 8 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 8 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) > 4.0 kVDC Protection class II between L/N-PE -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 front side IP65 acc. to IEC 60529 rear-side IP65 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw, max 3 mm Mounting screw torque max 0.6 Nm 2 screws M3 with sealing are provided black / white / metallic, UL 94V-0 Appliance inlet/-outlet Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Filter C14 / C18 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 8 A, Protection Class I or II 1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 1.6 W 1-pole/ 1,2 W 2-pole per pole Admissible power acceptance at higher ambient temperature see derating curves Standard and Medical Version, IEC 60939, UL 60939-3, CSA C22.2 no. 8 Technical Details > 2'800'000 h acc. to MIL-HB-217 F

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be...

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] Mounting from front side Mounting from rear side Assembly Instructions Mounting standard version A) front view B) detail front mounting type C) detail rear mounting type 1) sealing of flange 2) sealing of fuseholder 3) sealing of screw hole (front mounting type: sealing ring on screw head) 4) sealing of screw hole (rear mounting type: sealing on screw thread) Important: - use supplied fuse caps (2) and mounting screws (3/4) - optimal sealing requires even and solid panel opening - recommended tightening...

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current [A] Standard version Standard version Standard version Standard version Standard version Diagrams Standard version Admissible power acceptance in Watt Admissible power acceptance in Watt

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version All Variants Rated Current [A] Mounting side Cord retaining kits Protection Class Power Cord IP-protection Order Number Front Side Standard version Standard version Rear Side Standard version Front Side Standard version Rear Side Standard version Front Side Standard version Rear Side Standard version Front Side Standard version Rear Side Standard version Front Side Standard version Rear Side Standard version Front Side Standard version...

Power Entry Modules with Line Filter https://www.schurter.com /PG06 Mounting side Cord retaining kits Protection Class Power Cord IP-protection Order Number Front Side Standard version Standard version Rear Side Standard version Front Side Standard version Rear Side Standard version Rear Side Standard version Front Side Standard version Rear Side Standard version Front Side Standard version Front Side Standard version Rear Side Standard version Rear Side Front Side Rear Side Rear Side Front Side Rear Side Rear Side Rear Side Front Side Rear Side Rear Side Front Side Rear Side Rear Side...