Introducing STATCARE From the creators of STATIM ® One step, pre-sterilization, handpiece maintenance spray • STATCARE provides lubrication to help increase the life of dental handpieces. It cleans and protects turbines, air motors, shanks and heads to ensure long lasting service STATCARE can be used as directed by handpiece manufacturer’s instruction or mainenance guide FOR STATIS handpieces, lubrication should be done prior to every sterilization cycle SIMPLY HOLD the can in a vertical position and spray for one full second during every lubrication process. Run the handpiece for 20 seconds after lubrication to expel excess oil HANDPIECES are then ready for sterilization in a STATIM Cassette Autoclave®; for fast, gentle sterilization that helps prolong handpiece life Order No. S500-6NA (case of 6 cans) E-Type Nozzle Order: No. S500E Three specifically designed reusable, metal spray-cap nozzles deliver just the right amount of STATCARE spray to the exact areas where cleaning and lubrication are required. STATCARE NOZZLES Multi Nozzle* Order: No. S500M STATIM and STATIM Cassette Autoclave are registered trademarks and STATCARE and STATIS are trademarks of SciCan Ltd. *Fits KaVo MU

STATIS™ handpiece maintenance guide Lubricate prior to every sterilization cycle. High speed handpieces Preparation: After use of the high speed handpiece, remove the bur or diamond and clean the handpiece externally, using a soft bristle brush under cold tap water. Dry handpiece with gauze or paper towel. Lubricate and operate: To lubricate and clean turbines use Multi spray nozzle #S500M as illustrated (also suitable for low speed air motors equipped with a Multiflex® coupling). Hold a tissue, paper towel or an absorbent pad over the head of the instrument to catch dispelled debris. Then inspect...