Material Specifications

The device is made from CoCr L605 alloy, known for its strength and biocompatibility.

Dimensional and Mechanical Properties

• Shortening after expansion is less than 1.0%, ensuring dimensional stability.
• Cross-sectional profile is under 1.05 mm, indicating a slim design.
• Stent-to-vessel ratio is 13% at 3 mm expanded diameter, reflecting the relative thickness compared to vessel size.
• Strut thickness is 0.075 mm, contributing to flexibility and support.
• Recoil is 4.0%, indicating the degree of elastic return after expansion.

Compatibility and Usage Parameters

• Compatible with 6F guide catheters, facilitating standard interventional procedures.
• Guidewire compatibility is 0.014 inches (0.35 mm), a common size for coronary interventions.
• Non-magnetic, thus compatible with MRI environments.

Operational Specifications

• Nominal pressure for deployment is 6 atm, the recommended inflation pressure.
• Burst pressure is 18 atm, indicating the maximum pressure the device can withstand.
• Delivery system length is 145 cm, suitable for reaching target sites within the vasculature.