Sechrist Air / Oxygen Mixers
2Pages

Sechrist Air / Oxygen Mixers F EATU R E Sechrist Air / Oxygen Gas Mixers provide for precise mixing of air and oxygen for many clinical applications. Sechrist Air / Oxygen Mixers are available in high flow or low flow configurations and are available for general or specific applications. Sechrist controls every step of design, engineering, manufacture and service of all of our products to assure an unmatched level of quality, performance, safety and patient comfort. Sechrist can also customize the Air / Oxygen Mixers to meet the specific needs of our healthcare partners. SIMPLE - It is well understood that if a device can be designed to perform its intended task in a straight forward and simple manner, the better it will accomplish its function. A simple design resulting in lower costs, increased reliability and lower maintenance costs. Sechrist mixers are consistently less complex than competitive devices. ACCURATE - The precise design of Sechrist mixers provides assurance of oxygen concentration accuracy within +/- 3* percentage point even in circumstances involving wide variances in supply gas pressures. VERSATILE - Pole or wall mounting configurations as well as dual outlet connections are available for most models. FILTRATION - Sechrist mixers incorporate integral filtration of supply gases. A 0.1-micron water trap/ filter is provided for the air inlet connection and both gas supply connections are protected by 7 micron sintered stainless steel (noncorroding) filters. SAFETY - In the event of a supply gas failure, an audible alarm is triggered as well as an assurance that gas from the remaining supply source will continue to be delivered. CUSTOMIZED - Custom designs can be manufactured for desired specifications and applications. Codes And Standards Sechrist Industries’ design, manufacturing services and installation systems are certified to ISO 13485 Quality Assurance Standard for Medical Devices. In addition, Sechrist’s Air/ Oxygen Mixers are designed, fabricated, assembled, tested, and installed in accordance with the following codes and standards, current editions: • NFPA 99 Health Care Facilities • U.S. FDA Requirement, 21 Code of Federal Regulations, Part 820 • CMDCAS – Canadian Medical Conformity Assessment System • IEC 60601-1 Registered Address: Obelis s.a. Bd. Général Wahis 53 B-1030 Brussels, Belgium Phone: 32.2.732.59.54 Fax: 32.2.732.60.03 E-mail: mail@obelis.net Representative: Mr. Gideon ELKAYAM (CEO) Sechrist Industries, Inc. 4225 E. La Palma Avenue Anaheim, CA 92807 USA Phone: 714-579-8400 • Fax: 714-579-0814 USA and Canada: 1-800 SECHRIST (732-4747) Website: www.sechristusa.com • email: info@sechristusa.com

Sechrist Air / Oxygen Mixers SP ECI F ICATIONS Sechrist Air / Oxygen Gas Mixers - Model 20090 & Model 3500 CP-G Provides for precise mixing of air and oxygen for many clinical applications. Models 20090 & 3500 CP-G gas mixers are specifically designed for ECMO and Heart-Lung Bypass applications. Accuracy*: +/- 3% • Maximum Flow at 60% FIO2 and 50 psi Supply Pressure: 40 LPM Bleed Flow: 3.0 - 4.0 LPM @ 8 LPM Flow Rate • FIO2 Range: 0.21 +0.01 to 1.0 -0.1 Gas Supply Range: 50 psi +/- 10 psi Model 20090 Standard Accessories: 0-10 LPM flowmeter 1000 ml flowmeter 100-1400 ml CO2 flowmeter Water...