LABSYS evo TGA STA DTA / DSC by Setaram A trademark of KEP Technologies group

GAS FLOW CONTROL As many of the TGA and STA applications are gas-solid reactions, an accurate atmosphere control is a key point for a successful measurement. Obviously, LABSYS evo is equipped with the possibility of gas flow (inert or reactive). A fully automated gas control panel with Mass Flow Controllers is also available as an option: LABSYS evo is a user friendly, robust and highly powerful thermal analysis platform. HIGHLIGHTS include: A • comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application: S election from 3 different...

Thermogravimetric Analysis (TGA) measures the mass loss or gain of a sample of material as a function of time or temperature when it is heated or cooled under a certain temperature profile and atmosphere control. LABSYS evo TGA sensor is an alumina based rod held by the balance and equipped with a sample temperature measurement thermocouple. The sample is held in an alumina (440 µL) or platinum (500 µL) crucible. LABSYS evo TGA 1150 is typically applied to polymers, phar- maceuticals, biomaterials and other organic substances like coal, oils, lubricants… Studied phenomena range from desorption,...

i LABSYS evo DTA/DSC relies on the ideal design of the LABSYS evo furnaces - both 1150 °C and 1600 °C versions - and gas flow control unit, with a perfectly centered rod, locked in that position. While DTA is mostly used to determine the temperature at which heat effects occur, properly calibrated DSC rods lead to more accurate determination of the amount of heat, whereas the 3D Cp rod is ideal for heat capacity. Curie points, glass transitions, phase transitions, crystallinity, crystallization temperatures and kinetics, and heat capacity are typical measurements achieved by the LABSYS evo DTA/DSC....

LABSYS evo TGA and STA were designed to fulfill the requirements of international standards concerning polymers, rubber, plastics, oils, lubricants and other commonly tested materials. It includes ISO11358-1&2 on thermogravimetry of polymers, ASTM D6370 and E1131 on compositional analysis, ASTM E1582 and ASTM E2440 on calibration, and ASTM E1641, ASTM E1868, E1877, E2008, E2402, E2403, E2550. Consult us for more information. Option : AKTS Thermokinetics software for comprehensive investigation of reaction or decomposition pirana.net • Specifications are given as indications only and are not contractual...