Clinical Chemistry ZY-260 Fully Automatic Clinical Chemistry Analyzer Parameter Specification Clinical Chemistry Reagents Test Menu Biochemical constant test speed: 200 test/hour, ISE: 400 tests/hour ^ Renal Function © Blood Lipid System functions Type of sample Continuous standby for 24 hours, emergency test, automatic dilution, automatic retest, automatic sleep and wakeup Single/dual reagent (s) and wavelength (s) settings, 1 - 15 min response time For whole blood test, serum test, plasma test, urine test, among others, please see Instructions for Use Analytical method Calibration method One-point endpoint method dual-point endpoint method, reaction speed method (kinetic method), two-point speed method (fixed time method) and potential survey method for ISE test Linear calibration: factor < method, linear method (including two-point linear and multi-point linear methods) Non-linear calibration: spline method, broken line method, exponential method, logarithmic method, 3P parameter method, 4P parameter method and 5P parameter method Sample System Sample tray 54 sample positions available for mixed placement of miscellaneous samples and bar code scanning (optional) Sample volume Fully Automatic Clinical Chemistry Analyzer Sample probe Liquid level detection, volume tracking, automatic anti-collision protection, probe blockage detection (optional), etc. Inner and outer wall cleaning technology, automatic maintenance and cleaning, with a cross-contamination rate of lower than 0.08% Sample tube A variety of specifications for micro sample cup and sample tubes available on market Reagent System Reagent tray Reagent volume 72 reagent positions, 36 positions on both inner and outer rings respectively, available for 72 reagent bottles with volume of 20mL and 35mL. Scalable bottle volume, allow bar code scanning (optional) Cleaning solution settable at any position_ Reagent probe Liquid level detection, volume tracking, automatic anti-collision protection Inner and outer wall cleaning technology, automatic maintenance and cleaning, with a cross-contamination rate of lower than 0.08% Temperature for refrigeration of reagent • hs-CRP . WCRP Continuous refrigeration for 24 hours at 2 - 8'C Reaction System Reaction tray Tray design, with 80 cuvettes Semi-permanent organic glass (plastic) with optical path of 6mm Reaction solution volume Constant temperature system electrical heating constant temperature system Temperature of reaction tray Temperature fluctuation ±0] c of reaction tray 37 C, real-time display of temperature Stirring mechanism Independent stirrer Optical System Light source Flalogen lamp, available for automatic sleep and wakeup Concave grating photometry, post- spectroscopic technology Wavelength precision < ±inm KEHUA BIOTECH Absorbance range Working Conditions Power supply 900VA (UPS 1500VA power supply is optional) Shanghai Kehua Bio-engineering Co., Ltd. Mail: lnternational(5)skhb.com Phone: +86-21-64950625 Website: https://www.skhb.com/en/ Address: 1189 North Qinzhou Road, 200233, Shanghai Water consumption Less than 7 l/h deionized water 890mm (length) X725mm (width) X 550mm (height) Manufacture: Shanghai Kehua Laboratory System Co., Ltd. Address: 2 Floor, Bldg 84, No.1198 North Qinzhou Road, Xuhui District, 200233, Shanghai

KEHUA BIOTECH Care for life Dedicate to excellence Automatic Cleaning System Smart Filling System (Sample/Reagent Probes) Concave grating photometry, post-spectroscopic technology Constant speed 200 tests/hour, up to 600 tests/hour with ISE Electrical heating constant temperature ; system AAA supported system with improved traceability for ensuring the accuracy High capacity sample tray and reagent tray, allow 72 clinical chemistry items run simultaneously • Stepwise thorough cuvette cleaning by warm water, with guarantee on temperature stability of cuvettes • Independent stirring, utmost polishing,...