Photometric test: 400 tests/hour, ISE: 400 tests/hour(Na+,K+,CI ,Ca2+) System functions Continuous standby for 24 hours, emergency test, automatic dilution, automatic retest, automatic sleep and wake-up Single/dual reagent (s) and wavelength (s) settings, 1-10 min response time For whole blood test, serum test, plasma test, urine test, among others, please see Instructions for Use Analytical method Calibration method Sample System Sample tray One-point endpoint method, dual-point endpoint method, reaction speed method (kinetic method), two-point speed method (fixed time method) and potential survey method for ISE test Linear calibration: factor K method, linear method (including two-point linear and multi-point linear methods) Non-linear calibration: spline method, broken line method, exponential method, logarithmic method, 3P parameter method, 4P parameter method and 5P parameter method 90 sample positions available for mixed placement of miscellaneous samples and bar code scanning (optional) Sample volume 1.5 - 70pL, progressively increase by O.lpL Sample probe Liquid level detection, volume tracking, automatic anti-collision protection, probe blockage detection (optional), etc. Inner and outer wall cleaninq technology, automatic maintenance and cleaninq, with a cross-contamination rate of lower than 0.08% Sample tube A variety of specifications for micro sample cup and sample tubes available on market Reagent System Reagent tray Reagent volume 72 reagent positions, 36 positions on both inner and outer rings respectively, available for 72 reagent bottles with volume of 35ml and 65ml. Scalable bottle volume, allow bar code scanning (optional) Cleaning solution settable at any position Reagent probe Liquid level detection, volume tracking, automatic anti-collision protection Inner and outer wall cleaninq technology, automatic maintenance and cleaninq, with a cross-contamination rate of lower than 0.08% Temperature for refrigeration of reagent Continuous refrigeration for 24 hours at 2 - 8'C Reaction System Reaction tray Tray design, with 81 cuvettes Cuvette Permanent hard glass cuvette (glass) with optical path of 6mm, semi-permanent organic glass (plastic) (optional) Reaction solution volume KEHUA BIOTECH Fully Automatic Clinical Chemistry Analyzer Constant temperature system Temperature of reaction tray Liquid-gas synchronous constant temperature device 37 C, real-time display of temperature Temperature fluctuation of reaction tray Stirring mechanism Independent stirrer Optical System Light source Halogen lamp, available for automatic sleep and wake-up Concave grating photometry, post-spectroscopic technology Wavelength precision s±lnm Absorbance range Working Conditions Power supply Shanghai Kehua Bio-engineering Co., Ltd. Mail: [email protected] Phone: +86-21-64950625 Website: https://www.skhb.com/en/ Address: 1189 North Qinzhou Road, 200233, Shanghai < 1500VA (UPS 2000VA power supply is optional) Water consumption Less than 10 l/h deionized water 1075mm (length) x706mm (width) xHOOmm (height) Manufacture: Shanghai Kehua Laboratory System Co., Ltd. Address: 2 Floor, Bldg 84, No.1198 North Qinzhou Road, Xuhui District, 200233, Shanghai KEHUA BIOTECH Dedicate to excellence @ Liver Function @ Renal Function • UREA • al-MG @ Blood Lipid • hs-CRP . WCRP @ Tumor Marker Q Pancreas

KEHUA BIOTECH Care for life Dedicate to excellence Automated Washing System Accurate Optics and Reaction Systems 400 tests per hour, up to 800 tests per hour with ISE Concave grating photometry, post-dispersive technology Liquid-gas synchronous constant temperature device Standard quartz cuvette • Permanent glass cuvettes with good light transmission, anti-corrosion, anti-wear, and durable • Multi-step warm water washing system with more stabletemperature of the cuvette tray and more thoroughly washedcuvettes • Independently operating, highly polished, three-dimensional vortex-style automatic...