SMP858-TSF-S
15Pages

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Product introduction Hygienic pressure transmitter Hygienic pressure transmitter, designed for food and pharmaceutical industry, is suitable for CIP/SIP cleaning and sterilization. Smart compact design, the welded process diaphragm medium parts is made of high quality stainless steel 316L, roughness≤0.4um, filling fluid with hygiene standard in line with FDA certification, variety of international standard process connections are available. vertical installation horizontal installation Main parameters Pressure types Gauge pressure Pressure, level Measuring range 10kPa-3MPa, please refer to the ordering information chapter Output signal Reference accuracy Measuring medium viscous, paste-like, adhesive, crystallising, particulatescontaining and contaminated media Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2016.11.V1.0-1

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Technical specifications Smallest calibratable span Lower range limit (LRL) Upper range limit (URL) Overpressure limit * Nominal value The unit of the measuring range above can be converted into kg/cm²、 MPa and kPa. Provide other measuring range according to requirements. Adjust requirements: lower range value (LRV) and upper range value (URV) can be adjusted within the scope of the upper and lower range limit, minimum measuring range≤| URV - LRV |≤maximum measuring range. * Limit value of overpressure: depends on the...

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Technical specifications Damping time Power supply Total damping time constant: equal to the sum of damping time of amplifer and sensor capsule Damping time of amplifer: 0-100S adjustable Damping time of sensor capsule (isolated diaphragm and silicon filling oil)≤ 0.2S Startup after power off: ≤6S Normal services after data recovery: ≤31S Operating conditions HART protocol 16.5-55VDC, communication load resistance 250Ω Load resistance 0-2119Ω for operation, 250-600Ω for HART protocol Transmission distance <1000 meters...

SENSING TOMORROW SMP858-TSF-S Monosilicon gauge pressure transmitter Technical specifications Basic standards Test conditions Performance level Radiated interference Conducted interference (DC power port) Electrostatic discharge immunity test (ESD) GB/T 17626.2/IEC61000-4-2 4kV(Contact ),8kV(Air) Immunity to radio frequency EM-fields Power frequency magnetic field Immunity test Electrical fast transient / Burst Immunity Test Surge immunity requirements Immunity to conducted disturbances induced by radio frequency fields (Note 1)Performance level A: The preformance within the limits of...

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Menu function Transmission module type Remote control Upper range value, 20mA Lower range value, 4mA Output signal Local control Damping time LCD display unit Units Display mode Process variable shows on main screen, percentage and progress bar shows on secondary screen Analog output type Current shows on main screen, percentage and progress bar shows on secondary screen Percentage shows on main screen, percentage and progress bar shows on secondary screen Output type Square root Alarm signal Alarm signal Pounds per square...

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Product selection instruction Sensor select instruction Electrical connection Code Item Nominal value Range -40kPa-40kPa, smallest calibratable span 10kPa Range -100kPa-250kPa, smallest calibratable span 25kPa Range -100kPa-1MPa, smallest calibratable span 100kPa Range -100kPa-3MPa, smallest calibratable span 300kPa Electrical Stainless steel terminal, aviation plug connection M12*1 (4 pin) (H2), IP67,vertical mounting Stainless steel terminal, aviation plug M12*1 (4 pin) (H2), IP67,horizontal mounting Adjust requirements:...

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Product selection instruction Display module(C) Electrical connetion accessories Brown Black Blue White Brown Black Blue White Process connection select instruction Process connector material Connection type Standard connection, medium temperature: -25-85℃ Cooling element connector, medium temperature: -40-150℃ Isolated filling fluid Hygienic fluid filling, Neobee M-20, process temperature: -10-180℃ Silicon oil filling, process temperature: -45-205℃ Isolated diaphragm material Stainless steel, SUS316L Hastelloy C Process...

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Product drawing and dimension Standard drawing and dimension with display(C)/ without display (A)vertical installation(F1)(unit:mm) Standard drawing and dimension with display(C) / without display(A )horizontal installation(F2)(unit:mm) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2016.11.V1.0

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Product drawing and dimension Drawing and dimension with display(C)/ without display (A) vertical installation(F1) with cooling element(unit:mm) Drawing and dimension with display(C)/ without display (A ) horizontal installation(F2) with cooling element(unit:mm) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be changed due to further improve 2016.11.V1.0

SMP858-TSF-S Monosilicon gauge pressure transmitter SENSING TOMORROW Product drawing and dimension Installation Sketches Installation Sketches Dimension Dimension Specification Size(ΦD) Diaphragm size (ΦM） Diaphragm size(ΦM) Specification Size(G) Process connection (K14-K15)(unit: mm) Process connection (K12-K13)(unit: mm) Installation Sketches Installation Sketches Dimension Dimension Specification Size(G) Diaphragm size(ΦM) Standard Specification Size(G) Diaphragm size(ΦM) Disclaimer: all the data used in the product description is not legally binding. Relevant technical details may be...