SS Swine V-Table The Shank’s® SS Swine V-Table Table is designed for surgery on hogs. The structural frame and top are all stainless steel. The table has scissor-action lift design and is equipped with 2-way tilt capability. Technical Specifications 26” x 84” lateral surface (66cm x 213cm) Six hinged wings (five tilt positions) Center drain trough 2-way tilt 6” swivel casters Self-contained power unit (available 110V/60 cycle or other power configurations for international use) Lowered height 15” (38cm) Raised height 48” (122cm) Rated for 2,500 lbs. (1,134 kg) Standard Accessories Set of four dorsal leg poles and tie loops Optional Features Hot dip galvanized/painted base frame construction Hydraulic System and Operation The Table is user friendly and merely requires access to power for operation. Once the table is connected to power, an on/off electric switch turns on the hydraulic system. The table is raised and lowered by manipulation of the hand control levers mounted on the table. The table can be stopped at any position during raising and lowering. The remaining two handles allow for independent retraction of the casters on the head and tail end of the table. The table can be placed in a stationary position (by retracting all casters) to prevent unintended movement during procedures. Lifting Large Animals Since 1957