HSM Micro System / 40,000 rpm
20Pages

SHARPLINE M14-700 Power console • Operating Speed: 40.000 rpm (Adjustable Maximum Speed) • Operating Voltage: 200-240 V • Power: 260 W • Irrigation Flow Rate: 100 ml/min (Adjustable Maximum Flow Rate) • Frequency : 50-60 Hz • Dimensions: 350x280x110 mm • Weight: 5.060 kg 1' f 1 M14- 800 Swiss Made Powerful Brushless DC Motor Technology • Autoclavable • Operating Speed: 40.000 rpm (Adjustable Maximum Speed) • Power: 150 W • Dimensions: 130x22 mm • Weight: 0.160 kg HSM Micro System > GRAPHICAL LCD ON THE POWER CONSOLE SHOWS ADJUSTED MOTOR SPEED, ROTATION DIRECTION, IRRIGATION PUMP FLOW RATE,...

INTRA MAIN PIECE STRAIGHT SHARPLINE INTRA MAIN PIECE ANGULAR MS - 550 Spray nozzle M8- 201 INTRA Main Piece, Straight No key needed for tightening Tip 15 mm long Transmission: 1:1 Burrs shank:0 2.35 mm Burrs length: 70 mm M8 - 210 INTRA Main Piece, Angular No key needed for tightening Tip 15 mm long Transmission: 1:2 Burrs shank: 0 2.35 mm Burrs length: 70 mm M8 - 202 INTRA Main Piece, Straight No key needed for tightening Tip 45 mm long Transmission: 1:1 Burrs shank: 0 2.35 mm Burrs length: 95 mm M8- 203 INTRA Main Piece, Straight No key needed for tightening Tip 75 mm long Transmission:...

BURR-SHANK70 MM LONG, SHANK 0 2.35 MM, ROUND SHANK • Suitable Burr-Shank types for M8-201, M8-210 and M8-160 o= 0= o=i= o==i= o===m=[= Standard Burrs Stainless steel

BURR-SHANK70 MM LONG, SHANK 0 2.35 MM, ROUND SHANK M8-160 • Suitable Burr-Shank types for M8-201, M8-210 and M8-160 Standard Rosen Burrs Stainless Steel

BURR-SHANK125 MM LONG, SHANK 0 2.35 MM, ROUND SHANK • Suitable Burr-Shank types for M8-203, M8-212

SHARPLINE HAND PIECES ANGULAR HAND PIECES ANGULAR M8- 556 Spray nozzle M8- 150 INTRA Main Piece, Angular No key needed for tightening Angle: 21° Transmission: 1:1 Color marked: One Blue Ring The burrs can be mounted with M8-160 imperator M8- 181 Angle head with imperator bearing. Transmission: 2:1 For burrs and cutters With quick-action "dental" shaft M8- 151 INTRA Main Piece, Angular No key needed for tightening Angle: 21° Transmission: 1:2 Color marked: Two Red Rings The burrs can be mounted with M8-160 imperator M8- 152 INTRA Main Piece, Angular No key needed for tightening Angle: 21°...

SHARPLINE MICRO SURGERY ATTACHMENT SKIN ABRASION M8- 160 Micro surgery attachment with imperator bearing, for burrs drills etc. With standard shank of 0 2.35 mm and a length of up to 70 mm, can be used for burrs. MB - 485 Fland piece for skin abrasion, With irrigation tube integrated in the protection shield, diamond grinding attachment. Smooth running due to ball bearings and taper socket of the grinding attachment. Application of the micro surgery attachment M8-160 Micro surgery attachment put micro surgery attachment into the chuck Burr with standard shank. 0 2.35 mm 70 mm length Insert...

SHARPLINE MICRO ATTACHMENT MICRO SAGITTAL ATTACHMENT M8 - 1105 Micro Sagittal Saw, pencil grip shape, with unloosable nut M8- 120 Micro oscillating saw Possibility to use extra thin blades for precision operations. Narrow design for good visibility. Saw blades have to be ordered separately

SHARPLINE MICRO STRAIGHT RECIPROCATING ATTACHMENT M8-728 Craniotome hand piece for skull opening no key is needed with M7-207 M8 - 190 Micro staright reciprocating saw Without saw blades. With spray nozzle M8-198 Oscillations per second: 160(at 20.000 rpm) Height of sroke: 2 mm M7- 208 Dura guard, turnable use with M8-728 M7-207 Dura guard, fixed use with M8-728 M7-201 Spare Cutter use with M8-728 M7- 202 Wire pass drill use with M7-200

MICRO DRILL M8 - 470 Micro Drill for burrs and drills. 0 4 mm Transmission: 20:1 SHARPLINE DRILL ATTACHMENT | L M8- 477 HUDSON chuck, for trepans M8 - 472 Universal chuck with key M8-473 max. 0 4 mm M8 - 471 Micro Drill for burrs and drills. For exchangeable chucks Transmission: 20:1 Suitable chucks: M8-472, M8-474, M8-477 M8 -474 Universal chuck with key M7-250 max. 0 6.35 mm r MS -476 Spray nozzle with clamp

ARTROSCOPIC TIPS SHARPLINE FOR M8-940 SHAVERARTROSCOPIC SYSTEM MS - 940 Shaver Hand Piece Variable suction control Connecting to disposable and resuable tips (the tips are ordered separately)

MICRO OSCILLATING ATTACHMENT OSCILLATING SAW M7-320 Key only, for changing saw blades M8- 501 Spray nozzle with clamp

SAGITTAL SAW BLADES SHARPLINE SMALL SAGITTAL ATTACHMENT M8- 276 Spray nozzle with clamp

CHUCKS AND ADAPTORS SHARPLINE FOR M8-720 DRILL RW/FW BORE MAIN PIECE FOR EXCHANGEABLE CHUCK WITH FORWARD AND REVERSE GEAR M7 - 680 Attachment with small three - jaw chuck, with key M8-473, 0 4 mm, exchangeable, use with M8-720 M7- 681 Attachment with three - jaw chuck, with key M7-250, 0 6.35 mm, exchangeable, use with M8-720 M7- 682 Adaptor for SQUARE shank use with M8-720 M7 - 684 Adaptor for TRINKE shank use with M8-720 M7- 685 Adaptor for OSTEO shank use with M8-720

SHARPLINE MINI DRILL ATTACHMENT BURRS-SHANK70 MM LONG, SHANK 0 2.35 MM, ROUND SHANK M12- 300 Mini Drill No key is needed Only use with pneumatic system HIGH SPEED Tungsten

MINI OSCILLATING SAW SHARPLINE USE WITH M12-360 MINI OSCILLATING ATTACHMENTOSCILLATING SAW M8- 1220 M12- 360 Micro Oscillating saw Oscillating degree is 7° The cutting blade is replaced by using M7-320 Key Only use with pneumatic system See page 37 for spare cutters with keys M7-320 M7 - 320 Key only, for changing saw blades

MINI SAGITTAL SAWUSE WITH M12-380 SHARPLINE MINI SAGITTAL ATTACHMENTSAGITTAL SAW M12-380 Mini Sagittal saw It is used in deep cutting the bones and other small bones in the mandibular and maxillofacing surgery. The cutting blade is replaced by key Only use with pneumatic system See page 39 for spare cutters with keys M7-320

MINI RECIPROCATING SAW BLADESUSE WITH M12-423 M8- 1420 SHARPLINE MINI STRAIGHT RECIPROCATING ATTACHMENTRECIPROCATING SAW M8- 1423 M12 - 423 Straight reciprocating saw It is used in deep cutting the bones and other small bones in the mandibular and maxillofacial surgery. No need for key to replace the blades Only use with pneumatic system 1 See page 41 for spare cutters