DISCOVER OUR LINE RANGE D -LINE This is the starting version of the LINE range. Ideal for all standard wards, it offers a simple design featuring a single profile to house both electrical and gas components whilst maintaining segregation between the two. The LINE range can be offered with or without integral lighting and with additional DIN rail for mounting accessories as an option. D -LINE-2 Suitable for both standard and critical care, this version features two separate profiles housing all services. Electrical and medical gas components run in completely different compartments and are independently...

EASY TO INSTALL, EASIER TO MAINTAIN We create our equipment based on two simple key principles: ease of installation and longlasting top quality components ensuring minimum maintenance and maximum reliability. LINE is delivered fully assembled to reduce costs of installation. GREEN LIGHTING Decrease your electricity consumption thanks to our innovative LED lighting strips, which are available for all direct, indirect and even night lighting. Lower maintenance, greater performance! Up to 40% energy saving; 50.000 hours average lifetime. POWDER COATING, POWERED HYGIENE Epoxy powder coating guarantees...

LINE - WALL MOUNTED D-LINE VERSION INTRODUCTION D-LINE is designed and recommended to offer an easy and price worthy solution for standard inpatient care. The bed head unit could be supplied with various lighting configurations: - either indirect or direct, - both It can house all medical gas outlets adequately segregated from the electrical components. The highly adaptable profile can be configured for all special hospital wards. Upon request, an integrated aluminum DIN rail is also available. LIGHT DIFFUSION A - Indirect light E - Direct light COMPONENTS B - Gas piping C - Gas compartment D -...

LINE - WALL MOUNTED INTRODUCTION LINE models are particularly designed for all critical areas in a hospital. Gas and electrical components are kept segregated by two or even three different profiles. These models give the opportunity to equip the bed head unit with a large number of services, according to the most detailed specification. All D-LINE models can be equipped with either direct or indirect lighting, or both. Similarly, an integrated single or double aluminum DIN rail can be supplied upon request. LIGHT DIFFUSION A - Indirect light E - Direct light COMPONENTS B - Electrical compartment...

PROFILE OVERVIEW This image is for general demonstration only. The number of services varies according to the specifications given by each customer. a - Switches b - Indirect light c - Equipotential ground socket d - Electrical socket e - Electrical entry fed f - Compartment for electrical components g - DIN rail (load 40kg/mt) h - Direct light i - Compartment for gas components j - Gas entry fed k - Gas outlet STANDARD MODEL DIMENSIONS

Different configurations are available for each LINE wall-mounted model. All LINE profiles are modular and allow a wide choice of D-LINE-2 configurations: - with none, one or both lighting profiles; - with none, one or both DIN rail profiles. Lighting and rail profiles can be combined at the same time. Please do not hesitate to contact our distributor or sales office for further clarifications. Dimensions in this prospect are just standard recommended ones. Each customer can then choose a different length according to the project s

LINE - HTM WALL MOUNTED INTRODUCTION SHD ITALIA has developed a number of specific versions, which can fully comply with the strictest HTM and BS regulations. Based on our D-LINE-2 and D-LINE-3 we have designed dedicated units featuring specific details that can fully satisfy the British technical memorandum: - Panel mounted sockets with no visible screws; - Electrical wiring according to BS 7671; - Pre-gassing according to HTM02-01. - Dedicated metal segregation boxes for each position of the following: o Voice/Data or IM&T services; o Nurse call module; o Mains, ELV and SELV electrical services;...

This image is for general demonstration only. The number of services varies according to the specifications given by each customer. a - Riser for electrical/gas/data passage g - DIN rail (Load 40 Kg/mt) b - Equipotential ground socket e - Compartment for electrical components This image is for general demonstration only. The number of services varies according to the specifications given by each customer.

ILLUSTRATIVE COLOUR CHART FOR ALUMINIUM PROFILES SPECIAL PATTERNS AND IMAGES Sample image Sample image 2 3 SPECIAL PEDIATRIC PATTERNS AND IMAGES SPECIAL FINISHINGS WOOD EFFECT The colours shown are for guidance only; please refer to the standard RAL colour chart. The choice of any colour not commonly used might require longer delivery time. Customers are highly recommended to consult our sales office for detailed advice. Special anti-bacterial paint is also available upon request, suggested for intensive care units. Please contact us to receive the full range of available finishes.

LIGHTING PLOTS LED LIGHTING FLUORESCENT LIGHTING

TECHNICAL DATA SHEET Testing in production for each single unit For each unit the following tests are performed: -grounding impedance protection in accordance with 18f) of standard 60601-1 - standard measurement of leakage current in accordance with 19.3 and 19.4 of EN 60601-1-measurement of dielectric strength, in accordance with 20.3 and 20.4 of standard EN 60601-1 – requirements as in 59.101.1, 59.102.1 and 59.103.1; 59.101.2); 59.102.2 b), 59.103.2); 59.101.2 BC), 59.102.2 (c)) and 59.103.2. b) – pressure tests in accordance with 59.101.2. d) and 59.102.2. d). Tests carried out on end-of-line...