Introducing The Dental Permanent Crown Resin P-PC The Purple Dance P-PC ceramic-filled crown resin is expertly designed for 3D printing of permanent single crowns, inlays, onlays, veneers and full arch denture teeth restorations. Added special nano ceramic hybrid composition for superior performance. This innovative resin combines the impressive mechanical strength of its predecessor with enhanced flexibility, resulting in exceptional impact resistance. Superior Wear and Fracture Resistance Natural Translucency Nano Optimal Radiopacity Optimal Radiopacity Low Water Absorption Ceramic Powder The advanced formulation of Purple Dance P-PC allows for quick and precise printing, streamlining chairside processes and ensuring reliable, fast delivery of products to patients. The cleaning process is fast and ncomplicated, while the minimal surface chalking allows for easy grinding and polishing.

Test Method VITA Shades Minimum Wall Thicknesses Heat Deflection Temperature, ℃ Water Absorption, % Suggested Printing Setting： Tips: Please shake well before use to avoid color difference. 3D Printer Layer Thickness Base Layer Exposure Time Normal Layer Exposure Time Motor Lift Speed

Finishing Process： 1, Washing: Please use anhydrous ethanol or isopropyl alcohol to soak and clean the model for 1 to 6 minutes. You can also put it in a low-frequency ultrasonic cleaner to improve the cleaning efficiency. However, in order to avoid damage to the surface of the model, it is not recommended to use an ultrasonic cleaner with too high a frequency. 2, Drying: Please use a compressed air gun or hair dryer to dry the model. 3, Remove the Support: To avoid damage to the model, please remove the support before proceeding to the next step of the curing process.Before post-curing the printed...

4, Polishing: It is recommended to use diamond tools or carbide tools to fine-tune the surface and contours, and use pumice and polishing agents to polish the surface of the object. In order to avoid dimensional deviations, avoid overheating the resin during polishing. 5, Storage and Transportation: Fully cured printed objects must be stored at room temperature and away from strong light sources. Storage conditions for liquid P-PC resin materials: Please store the liquid photosensitive resin in a sealed, light-proof bottle at a temperature of 15℃-28℃. 6, Waste Disposal Advice: Solidified separation...