Introducing The Dental Clear Aligner Resin P-CA The Purple Dance P-CA specially developed for 3D printing of clear aligner retainers (Invisible braces retainer), it can also print high temperature resistant surgical guides and flexible night guards. This resin is compatible with LCD/DLP 3D printers with adjustable printing parameters at 405nm and 385nm wavelengths on the market. This material has a unique shape memory function. Within a specific temperature range (27 ℃-100 ℃), the retainer printed with this material can return to its normal shape within 1 minute, and can be maintained for 30 minutes at a high temperature of 130℃, which is very convenient for dentists who are accustomed to using high-temperature sterilization. High Temperature Resistance Shape Memory Optimal Radiopacity Low Water Absorption Biocompati

Test Method Suggested Wall Thicknesses Heat Deflection Temperature, ℃ Water Absorption, % Suggested Printing Setting： Tips: Please shake well before use.This resin is compatible with LCD/DLP 3D printers with adjustable printing parameters at 405nm and 385nm wavelengths on the market. 3D Printer Layer Thickness Base Layer Exposure Time Normal Layer Exposure Time Motor Lift Speed

Finishing Process： 1, Washing: Please use anhydrous ethanol or isopropyl alcohol to soak and clean the model for 1 to 6 minutes. You can also put it in a low-frequency ultrasonic cleaner to improve the cleaning efficiency. However, in order to avoid damage to the surface of the model, it is not recommended to use an ultrasonic cleaner with too high a frequency. 2, Drying: Please use a compressed air gun or hair dryer to dry the model. 3, Remove the Support: To avoid damage to the model, please remove the support before proceeding to the next step of the curing process.Before post-curing the printed...

5, Storage and Transportation: Fully cured printed objects must be stored at room temperature and away from strong light sources. Storage conditions for liquid resin materials: Please store the liquid photosensitive resin in a sealed, light-proof bottle at a temperature of 15℃-28℃. 6, Waste Disposal Advice: Solidified separation materials (base plate, support structure) cannot be used again. Solidified materials can be disposed of as domestic waste. Liquid waste should be collected in special containers and disposed of in accordance with local laws. 7, First Aid Measures: If liquid resin accidentally...