Inpatient Pharmacy Automation Total Solution

Product Solution

Requirement overview Traditional inpatient pharmacies use cups for manual dispensing, which is time-consuming and labor-intensive, and human counting is prone to errors. In addition, tablets that are exposed to the outside and constantly contacting with pharmacists are prone to cross contamination. The dispensing work of the inpatient pharmacy is not only related to the medication safety of inpatients, but also to the hospital's image.

Inpatient pharmacy“correct”+“efficiency”huge improvement Before use（7-8 persons） Medical advice Dispensing list print Tablet dispensing Take wrong medication Medical advice Automatic packaging Tablet sachet check Efficiency improved Patient and tablet info are clear, accurate, easy to check Tablet check Long time High satisfaction Give tablet Quantity error contamination, hard to manage

Main product 产品简介 product introduction Storage module (Embeded 360 canisters) Both side door opening design Operating panel Packaging & printing module •. ATDPS 全自动包药机根据医院信息系统传 automatically packages unit dose oral tablet 送的医嘱信息，将一次药量片剂或 or capsule into the same sachet (unit dose sachet) based on the medical order information received from 胶囊自动包入同一个药袋内（单剂 HIS.量药袋），同时，要带上可以根据 At the same time, the patient information can be printed according to requirements, such as ward area, bed 医生要求打印患者信息，如病区、 number, patient name, medication time, quantity, QR code, etc., to ensure that the tablets are dispensed...

Working principle: After receiving the medical order information from HIS, J~j the system automatically dispenses tablets, checking, printing and packaging . The highest packaging speed can reach 60 sachets per minute. Implementation: prints patient information according to needs, such as ward number, ward number, bed number, patient name, medication time, type and quantity, and QR code on the sachet. Complete packaging

Technical Specification Model The parameters are subject to change without prior notice. Please refer to the accompanying documents for detailed parameters

Drawer mode storage u Each drawer can store 20 intelligent canisters, and there are total 18 drawers (expandable) which can store 360 canisters. u Tablet filling can be completed by opening the side door. u The drawer mode canister is easy to maintain and clean in the later stage. Multi varities of canisters u Unique mold core technology adapts to the despensing of large chewable tablets (such as Daxi) with a wider range of specifications and shapes; u Equipped with intelligent chip, the canister can be placed at random place and automatically recognized. u It only takes only 7 days from the...

Manual dispensing unit u A single MDM has 40 cells and can be expanded up to 120 cells. u It can realize advanced manual dispensing and batch filling of non machine-stored tablets. u Realize pre-dispensing of tablets from multiple departments and significantly reduce the error rate through external placement. Universal canister u Configure a corresponding number of universal canisters according to requirements, which can solve the packaging of more special shaped tablets. u Realize batch filling of non machine-stored tablets (1/2 or 1/4 pill).

Packaging & Printing Module u The packaging and printing module can be pulled out as a whole, facilitating the replacement of packaging sachets and ink ribbons. u Multiple patented technologies ensure stable packaging speed and high accuracy to the greatest extent possible. Packaging & Printing Module u Double brush mechanism at the pouch outlet (at the square frame) to prevent blockage. u Set up 5 transmission detection sensors and flattening devices at the chute outlet position to minimize blockage. u The system can provide reminders based on the sachet status.

Dual Temperature Control System Self-developed software u Dual heating tube mode, stable packaging temperature. u Can seamlessly integrate with medical institution systems. u If one side fails, the other side can continue to work to ensure u The system is equipped with a voice control system. that the dispensing is not affected. u The pull-out module is more convenient for later maintenance. u Self-developed software can be customized and modified according to the requirements of the customer.

Consumablematerial ♦ All packaging films are directly matched with ribbons, without additional charges, and have a high performance price ratio. (300 meters / roll) ♦ Sachets can be made of different materials and printed on different surfaces according to hospital needs. ♦ The sachet can be customized with various printing methods in combination with the pharmacy and nursing departments. ♦ Establish a basic vulnerable parts and spare parts warehouse in the hospital. (Second replacement) ♦ The factory is located in Shenzhen, and all accessories have basically been localized, so there is no need...

Accessory product - 1 Intelligent Inspection Machine u The inspection machine is used to assist pharmacists to verify the types and quantities of tablet sachets. Through advanced image recognition technology (to determine quantity, color, and appearance), it identifies the information of sachets and the packaged sachets. It intelligently determines whether the sachets are correct. Suspected incorrect sachets will be marked on the screen, and pharmacists can visually review them. u When using intelligent checking system, all tablet sachets will be photographed and archived in the database. The...

Checking interface Accessory product - 1 IKIIE/M u Fast checking: Checking speed 60 sachets/minute U Image checking: Based on intelligent image algorithms for recognition and verification, autonomously eliminate interfering factors, and make comprehensive decisions based on multi-dimensional information such as shape, color, and size to automatically determine the type and quantity of tablets. u Software system: The system supports automatic display of camera captured images, automatic acquisition of prescription packaging information, automatic prompt of sachet verification results, and automatic...